It's good when your home is cozy and warm. Especially in chilly autumn or cold winter. You want to rush to such a house after work; in such a house you can rest and relax, taking off all the hardships of a troublesome day and a ton of warm clothes. But what to do if the heating system - centralized or autonomous - does not heat your home sufficiently? What additional heat source would be the most rational? Let's figure it out together - which home heater is better in the 2019 rating.
What types of heaters are there for home use?
Today we will look at just 4 of the most basic types of heater:
- fan heaters;
- oil heaters;
- convectors;
- infrared heaters.
They differ in appearance, design and method of heating the room. Each type of device has its own distinctive characteristics, advantages and disadvantages. We will definitely look at all this, as well as the rating of the best models, in our review, and we will be able to figure out which ones are the best heaters for the home?
Fan heaters - quickly heating a small room
This type of device is low cost and simple in design. The heating element is placed in front of a powerful fan and heats the air. At the same time, the fan accelerates the flow of warm air around the room and takes in cold or cooled air from the other side.
Positive aspects of this device:
- allows you to quickly warm the entire room;
- takes up very little space;
- can also be used in the warm season - as a fan.
As a rule, fan heaters consume from 1 to 2.5 kW per hour of operation. Almost all models have a heating element heating regulator and a fan intensity regulator. It is convenient when the device can be controlled remotely or set on and off times. Also, it is worth paying attention to the overheating protection system and the quality of the network cable.
Negative sides:
- The fan heater dries the air;
- Disperses dust and microparticles through the air;
- It is quite noisy during operation.
We re-read a huge number of consumer reviews and identified the TOP 3 most interesting in terms of functionality and technical characteristics of the model.
Ballu BFH/S-03
The simplest and cheapest home fan heater. In fact, there is nothing to break inside this device. The control is mechanical; if the heating element or housing gets too hot, it turns off. The power is low - 900 watts, but this is quite enough to uniformly heat a room of 20 - 25 sq.m. The air is heated by the heating of an electric coil. The device is low noise, lightweight, mobile. But, the owners urge careful use of the model in homes where small children live - since the body of the device becomes very hot during operation and may even cause a burn when touched.
Timberk TFH T15XCZ
A stylish representative of the mid-price segment, it boasts a rational combination of device simplicity and some useful options. Let's take a closer look - inside the model there is a metal-ceramic heater with many cells for fast and efficient heating of air, maximum power - 1500 watts. Can work at half power - consuming 750 watts. Designed to heat a room of 20 sq.m. Externally, it is a compact and inconspicuous black and white triangle, installed on the floor or table. When tipped over, the device switches off immediately. There is an anti-freeze function - if the temperature drops below +5° - TFH T15XCZ automatically starts heating and dispersing air around the room.
Electrolux EFH/W-1020
A practical and reliable fan heater with a wide range of options. It is mounted on the wall, which means it does not threaten to burn the child. In addition, you can direct the flow of heated air in the direction you need. It has two operating modes for the fan heater and the ability to operate without turning on the heating element. By the way, the heating element is made of ceramics, the power is 2.2 kW. In addition to heating, the model provides the possibility of air ionization. Control – push-button, electronic. The user can independently set the temperature of the heater with an accuracy of 1°. Reviews of the model state that the EFH/W-1020 quickly heats a room of 20-27 sq.m., there is a timer and a control panel.
Oil coolers – a combination of mobility and productivity
Externally, this type of device resembles a conventional sectional cast-iron battery. However, in fact, the body of such a radiator is made of lighter steel, which heats up many times faster. Most often, oil radiators have wheels for ease of transportation. All seams are sealed. Inside there is mineral and environmentally friendly oil, which heats up almost to a boil.
Advantages:
- affordable cost;
- environmental friendliness;
- reliability of the device;
- noiselessness;
- ease of installation and use of the device.
Often, such devices become dryers for barely damp items of clothing - socks, gloves, handkerchiefs. But you should be careful - the device heats up to such an extent that it can easily leave a burn on the skin.
Flaws:
- slow warm-up;
- hot case;
- takes up quite a lot of space.
Still, if such a device suits you, let's find out which oil radiators are purchased most often?
Ballu BOH/CL-07
A convenient and productive model, accessible to any wallet. Mechanical control, there is an adjustment of the heating temperature, when turned on, the indicator light is activated. Designed to heat a room of 15 - 20 sq.m., has 7 sections, power - 1500 watts. An effective assistant in the off-season, you can safely choose it for your home or apartment, as a safety net.
Scarlett SC 21.1507 S/SB
A well-thought-out and reliable radiator for convenient use and quick warm-up. Two power modes - 1500 watts and 750 watts, 7 sections. Among the bells and whistles are a fireplace effect and a 24-hour timer. It lasts a long time, does not leak, settings are easy to set, and the controls are not glitchy. Overall, the device works properly and efficiently. The SC-056 model is equipped with an air humidifier, which makes the use of such a heater safer. Both models shut down when tipped over or overheated. There is a compartment for winding up the network cable.
Electrolux EOH/M-3221
A good radiator from a reputable manufacturer. An updated model range that combines the compactness of the device and high heating efficiency due to 11 sections and a precise thermostat. The housing is sealed and super durable; however, the device is switched off when tipped over. The control is blocked from accidental pressing and turns off when overheated. Three operating modes - with a power of 1000 watts, 1200 and 2200 watts. The EOH/M-3221 is weighty and massive, but it can be easily transported from place to place - after all, the manufacturer has equipped the device with wheels. In general, it works without any complaints. Fast and uniform heating of large spacious rooms (25 - 28 sq.m.), convenient control.
Convectors – quiet and inconspicuous
The operating principle of this type of heater is based on a common physical phenomenon. A short excursion into the school physics course - convection is a phenomenon due to which hot heated air rises up to the ceiling of the room, and cooled or cold air remains below, near the floor. Inside the device there is a powerful heating element, usually made of ceramics. Such a device heats the air, and it rises upward, and the cooled air smoothly settles down, where it is again heated by a floor convector. As you understand, convectors are absolutely silent, except for those models that are equipped with a fan. It is convenient when the convector is equipped with a precise temperature controller - this way you can set the preferred operating parameters of the device yourself.
Pros:
- quiet operation;
- heating efficiency;
- compactness;
- attractive design;
- availability;
- efficiency;
- ease of use.
Flaws:
- dries the air;
- heats the room locally;
- copes better with small spaces.
Let's find out which heater is best to choose among various convectors. TOP 3 best devices.
Inexpensive, but well-assembled and safe convector for heating rooms and purifying the air from dust and odors. Inside the convector there is an x-shaped fin heater, which guarantees extremely high heat transfer. Also, air flows pass through several filters for high-quality cleaning. Power – 1500 watts, can work with half power – 750 watts. It turns off when overheated, the case is protected from moisture. Reviews indicate that in its price segment this is a normal device with standard functionality and useful options. True, the case gets very hot, and transporting the device becomes quite problematic.
Ballu BEP/EXT-1500
Stylish and modern, practical convector. It has everything necessary for safe and productive work - remote control, timer, protective functions that are triggered when overheating or freezing. The model can be installed on the floor or hung on the wall. Occupies a minimum of space, pleasing to the eye with a beautiful appearance. Great for rooms of 15-20 sq.m., has two power modes - 1500 watts and 750 watts. Owners mention that the relay clicks loudly, and sometimes you can hear the sound of iron bending when the device cools down. But most reviews say that the model is reliable, efficient and well made.
Powerful and productive convector. Can be used in damp areas. Power – 2000 W, designed to work in a room with an area of 20 sq.m. Precise electronic control, the ability to set the required operating temperature, down to 0.5 degrees. This device is praised for its efficiency, fast heating, and the absence of relay switching clicks. Serves stably and for a long time, even under intense loads. Does not fail even during long periods of unattended operation.
Infrared heaters - home sun
Infrared heaters have come into use quite recently. Like everything new and not fully understood, IR heaters are often condemned for their negative impact on the human body. However, everything is completely different. The operating principle of this type of heater, although different from all previous types of devices, is still nothing revolutionary. Essentially, when you buy such a heater for your home, you are buying a small technical sun. Like the sun, the device creates streams of heat rays that are absorbed by various objects in the room. Then, these objects themselves begin to give off heat rays to the surrounding space. It's simple!
Device features:
- lowest power consumption;
- absolute silence;
- reliability;
- fast heating;
- does not burn oxygen in the room.
Flaws:
- Most heating occurs locally;
Let's get acquainted with the most optimal models of IR heaters for home use. So that you know what and from what to choose.
Ballu BHH/M-09
An absolutely budget-friendly and efficient compact heater. Designed for 15-18 sq.m., the power of one lamp is 450 watts, and there are two of them in the device. The heater inside is halogen and will work for a long time and flawlessly. The manufacturer has provided protective systems inside the device - from moisture, from tipping over, and shutdown when overheated.
Designed to heat 20 sq.m. Power – 800 watts. There is a timer for 3 hours. Judging by user reviews, it is perfect for directed heating - drying clothes in the bathroom, warming up beds before bed, heating a person sitting at a desk. At the same time, heating occurs very quickly and comfortably, there is no dry air or tightness of the skin. A high-quality carbon heating element will provide heating efficiency and low energy consumption at the same time.
Reliable and stylish device. Designed for ceiling mounting - that is, you can safely hang it in a bedroom or children's room - there is no risk of getting a burn when touched. High power - 1000 watts, heating a room of 20 sq.m. In the absolute majority, users could not identify a single significant drawback; in fact, this is the best home heater among infrared devices. Provides pleasant warmth, does not burn oxygen, and heats the objects themselves - bedding on the bed, clothes nearby, etc.
So we looked at all types of heating devices that are safe and convenient to use at home. We are confident that now you know which home heater is best according to the 2018-2019 rating, probably answered all your questions and dispelled doubts about purchasing any model from the list. We will only be glad if this information helps you make a wise choice and your home will always be warm and comfortable.
With the onset of cold weather in our country, the heating season begins. People think about ways to heat rooms and choose the most optimal type of heater. The device can be purchased for different purposes:
- for space heating;
- to maintain a comfortable temperature in it;
- as an additional source of heat when the main one is insufficient.
All heaters differ in type of design and method of operation. There are four of them in total:
- Oily. They are considered the most affordable and simplest in design. They are distinguished by their mobility, noiselessness, and environmental friendliness.
- Convector. Provides heating and air circulation. Takes up little space and is easy to use. But it is only suitable for small rooms and sometimes dries out the air.
- Fan heater. It has an operating principle similar to a conventional fan. It is characterized by its small dimensions and quick heating of a small room. But there is a minus - it dries out the air.
- Infrared. They affect surrounding objects, which then give off heat. It does not dry out the air, is absolutely safe and evenly warms the room.
Best Inexpensive Infrared Heaters
An infrared heater is a device that consists of a steel body and a quartz tube, protected on top by a grille. An infrared heater heats everything that is next to it (furniture, walls and floors), and not the surrounding air. It is more suitable for heating small spaces. Its use is possible both in closed and open spaces.
3 Almac IK11
High quality ceiling heater
Country Russia
Average price: 3390 rub.
Rating (2019): 4.6
A popular model of ceiling heater is Almac IK11. The heating power is 1000 W, and the maximum service area is 20 m2. A special feature of the infrared heater is its ceiling mounting. Attached to the ceiling, thereby saving space in the room. Ceiling installation is also safer and is good for use in children's rooms. The only disadvantage of the ceiling location of the heater is that it primarily heats the objects closest to itself, respectively, the person’s head receives more heat than the legs.
- easy installation;
- fast heating;
- doesn't make noise.
- no wall brackets.
2 Polaris PKSH 0508H
Best carbon heater
A country: USA (manufactured in China)
Average price: 2400 rub.
Rating (2019): 4.4
The next model in the rating, Polaris PKSH 0508H, has a carbon type IR heater. The essence of such devices is that they do not consist of tungsten filament, but of carbon fiber. The thermal conductivity of such fiber is higher than that of metal spirals. Other advantages of carbon heaters:
- speed of heating and cooling
- long service life,
- energy saving,
- does not dry out the air.
There are, however, some disadvantages. Heaters of this type are very fragile, and their price is much higher.
For convenience, Polaris PKSH 0508H has a carrying handle, a timer, and a switch with an indicator light. If it falls or overheats, it turns off automatically. A special sensor built into the device monitors the temperature in the room: after sufficient heating, the heater turns off, and when cooled, turns on again.
- heats up quickly;
- does not dry out the air.
- no spare heating elements.
Which heater is better?
There are several types of heaters: infrared, convector, oil radiators, thermal fans. The main criteria when choosing a heater are its safety, ease of use, efficiency and cost-effectiveness. To choose the best heater for your space, it is important to know the advantages and disadvantages of each type of device.
|
Heater type |
Advantages |
Flaws |
|
Infrared heater |
The most economical Absolutely silent Does not reduce humidity and oxygen content in the room Instant air heating The best option for the bathroom Low wear |
Limited heat spot (does not heat the entire room) High cost of the system (if you need to heat the entire apartment) |
|
Convector |
Easy installation Compact dimensions Simple controls Beautiful design Affordable price High efficiency |
Dries the air. You have to buy a humidifier Suitable for heating small areas |
|
Oil radiator |
Mobility (can be moved at any time) Fire safety Eco-friendly heating Suitable for continuous heating Does not dry out the air Affordable price Silent operation |
Long air heating Occupies useful space in the room |
|
Thermal fan |
Fast room heating Compact dimensions Can be used as a fan Suitable for heating large areas (heat gun) |
High noise during operation Dries the air Raises dust in the room |
1 Wester IH-2000
Fastest and most even heating
A country: UK (produced in Russia)
Average price: 4599 rub.
Rating (2019): 5.0
Ceiling model of infrared heater, designed to heat rooms up to 20 m2. Due to the high power (2000 W), rapid heating is achieved in literally 20 minutes. The heater is easily mounted on the ceiling - you can do it yourself, there is no need to resort to the services of specialists. Like all infrared heaters, it does not burn oxygen. Compared to other models in this category, it provides the most uniform and stable heating.
The model is optimally suited for heating balconies, loggias, garages, and living rooms. It burns little electricity, despite its fairly high power. There are no dissatisfied users - all reviews are positive. Many people point to the good quality and reliability of the equipment - the heater can operate continuously for a long time without breakdowns. Some users believe that the heating area is too high, but since such complaints are rare, they can be attributed to insufficient thermal insulation of the premises.
- light weight;
- adequate price;
- does not dry out the air;
- ease of installation;
- economical energy consumption.
No shortcomings could be found.
The best convectors: price – quality
What is the essence of a convector heater? Cold air rises and passes through the heating elements. The principle is very similar to a fan heater, but here the air circulates naturally. Heating of the room occurs evenly and silently, but more slowly.
3 Nobo C4F20
Quality and energy saving
Country: Norway
Average price: 13,490 rub.
Rating (2019): 4.7
We included the Norwegian-made convector Nobo C4F20 in the rating because of its quality and ease of use. Its price is quite high, but this is the cost of rich functionality, stylish design, and high technology. This heating system is equipped with all the functions characteristic of climate control technology: thermostat, temperature control, shutdown when overheating, frost protection mode, moisture protection. By spending money on the Nobo C4F20, you will save significantly on electricity.
The appearance and design of the device will fit into any interior of the room, and the laconic body will not attract attention. The heater can be used as a wall-mounted model or simply installed on the floor.
- sensitive thermostat;
- economical;
- safe.
- high price;
- no display.
2 Electrolux ECH/AG-1500MFR
Availability of dust filter
Country: Sweden
Average price: 3290 rub.
Rating (2019): 4.8
The next line in our rating is the Electrolux ECH/AG-1500MFR convector heater. Its price is slightly lower due to mechanical control. It also serves 20 m2. area and similarly turns off when overheated. The convector body is waterproof and can be used in the bathroom. The presence of a thermostat will allow you to maintain a constant temperature in the room, and a dust filter with a multifunctional cleaning system will help clean the air from dust.
- heats up quickly;
- presence of a thermostat;
- price.
- At full power it quickly overheats and turns off.
1 Ballu BEC/ETMR-1500
The best wall-mounted convection heater
Country: China
Average price: 3790 rub.
Rating (2019): 4.9
The 1,500 W convector heater is designed to heat rooms up to 20 m2. The wheels make it easy to move around the room. Can be used as a wall heater for convenience and space saving. There are two modes - half and full power. The case is protected from moisture - the device is not afraid of water, it can be placed in the bathroom. In case of accidental overturning and overheating, the heater automatically turns off.
The heating power corresponds to the specifications according to the passport - the heating device copes with the declared area normally. According to user reviews, the heater consumes a moderate amount of electricity, operates silently, and does not spoil the design of living rooms. The case does not heat up during operation. According to users, this is one of the best wall-mounted convector models in the price range up to 4,000 rubles.
- low cost;
- power and quick heating of rooms;
- possibility of wall mounting;
- protective shutdown in case of overheating and capsizing.
We could not find any shortcomings or negative reviews about the model.
The best oil radiators: price - quality
Oil radiators are very popular among the Russian population due to their low price, efficiency and simplicity. The device consists of a metal case, inside of which there is a heating coil and oil. The spiral heats the oil, which in turn heats the metal body, and then the air. The oil radiator is as close as possible to the central heating radiator in both appearance and characteristics. It also has several sections, it can be left to work for days and used as the main source of heat. This type of heater is considered the safest and most environmentally friendly.
3 Timberk TOR 21.2211 SLX
Reliability and ease of management
Country: China
Average price: 3010 rub.
Rating (2019): 4.7
Inexpensive, but very successful model of electric oil heater. It features high power (2200 W) and good heating speed. This is facilitated by the increased number of sections (11) and the use of a fireplace effect in the design. The temperature can be adjusted quite accurately thanks to electronic control. And the built-in thermostat independently maintains it at the desired level. The maximum area that the heater can serve is 28 m2 - it is ideal for heating a separate room, a small apartment or a private house.
User reviews most often mention such advantages of the heater as low cost, reliability, and ease of operation. Many people also like the simple but attractive design and safety.
- low cost;
- increased number of sections;
- ease of operation and reliability.
Judging by user reviews, this model has no significant drawbacks.
2 Resanta OM-7N
Fireplace effect
Country: Latvia
Average price: 2540 rub.
Rating (2019): 4.6
Resanta OM-7N is an oil heater from a well-known Latvian manufacturer. All Resant products are certified and of high quality. This model is a heater with 7 sections and a power of 1500 W. Designed for small rooms up to 15 m2.
When the desired temperature is reached, the heater automatically turns off, and when the air cools down, it turns on again, thereby saving energy and not drying out the air. The fireplace effect allows you to quickly heat up the room. A significant advantage of the model is its low price.
- perfectly justifies the stated capabilities;
- does not dry out the air.
Cons: not identified
1 Polaris PRE W 1125
The optimum ratio of price and quality
A country: Russia (manufactured in China)
Average price: 5099 rub.
Rating (2019): 4.9
An oil heater from Polaris is perfect for heating a small apartment, a separate room or a private house. Due to the increased power of 2500 W, the model copes with fairly large areas - up to 25 m2. Power is adjustable in three positions. The heater is quite heavy, consisting of 11 sections, but this increases the heating efficiency.
One of the features is the fireplace effect - thanks to the special design, increased convection of warm air from bottom to top is achieved, mixing of air masses and their more uniform heating. The device is very convenient to use - there are wheels and a handle for easy movement, and a cord compartment for compact storage. Users consider this model to be the best option in terms of price and quality ratio.
- fireplace effect;
- fast warm-up;
- high power;
- convenience and safety of use.
Based on reviews from specialists and customers, no significant shortcomings could be found.
The best inexpensive fan heaters
A fan heater is a type of heater that allows you to quickly heat a room. It consists of a housing, a heating coil and a fan. The fan forces air through the heated coil. Due to the simplicity of the design, most heaters of this type are low in cost. When the room heats up, the fan heater turns off and turns on again when the air cools down. The device can also operate when the heating coil is turned off, then it serves as a simple fan. The disadvantages of the device are its noise and energy consumption.
3 Hyundai H-FH3-15-U9202/U9203/U9204
Compact, waterproof housing
A country: South Korea (made in China)
Average price: 1150 rub.
Rating (2019): 4.7
The small, compact fan heater has captivated users with its heating efficiency and cute design. At a low price and toy size, it easily heats the air in a room up to 14 m2. The degree of heating can be adjusted, then the fan heater will automatically maintain the set temperature thanks to the built-in thermostat. In warm weather, it can be set to operate as a regular fan.
Buyers choose this model to create a comfortable temperature in individual rooms of an apartment or country house. You can also easily turn it on in the bathroom - the moisture-proof housing eliminates the possibility of a short circuit. The light weight of the product makes it easy to carry and transport it to any desired location. Judging by the reviews, the fan heater is made of surprisingly high quality for such an inexpensive model. The plastic looks reliable and does not emit any odors when heated.
- not afraid of moisture;
- quickly warms up small rooms;
- lightweight and compact.
The only disadvantages include noisy operation (68 dB).
2 Timberk TFH T15NTK
Safety, compactness and fast heating of the air
Country: China
Average price: 1800 rub.
Rating (2019): 4.8
Compact and convenient fan heater, designed for small areas up to 16 m2. Depending on the initial temperature in the room, you can choose to operate in one of two power modes - 700 or 1,400 W. In summer, the heater can be used as a regular fan. Thanks to the ceramic heating element, this fan heater is much safer to operate compared to spiral models. Additional safety is provided by automatic shutdown in case of overheating.
The model is popular, so there are plenty of reviews about it. In most cases, buyers are satisfied with the quality of the heater. The main advantages that they highlight are low cost, compactness, and rapid heating of the air in the room.
- two powers;
- operation in fan mode;
- safe ceramic heater.
No serious shortcomings were identified in the model.
1 Electrolux EFH/W-1020
Fan heater with wall mounting
Country: Sweden
Average price: 4060 rub.
Rating (2019): 4.8
A fan heater can be convenient and relatively safe. The Electrolux EFH/W-1020 model has these characteristics. Thanks to wall mounting, the heating device is out of reach of a child. It can be used to heat a child's room. In addition, it saves space in the room, which is important for small spaces.
Electrolux EFH/W-1020 is equipped with a second generation ceramic heating element. At low temperatures, it gives off the most heat. It is worth noting the stylish case with a display, the presence of a timer and a remote control. The built-in ionizer saturates the air with beneficial ions and improves air quality.
- quickly heats the room;
- can work as a fan.
- short power cord.
The best infrared quartz heaters
Infrared quartz heaters appeared on the market relatively recently. The device has a simple design - a chromium-nickel heating element is built into a monolithic slab of quartz sand. Such devices quickly gained popularity due to their features: fire safety, versatility (used in any room and even in a car), high heating rate. A significant difference is that a quartz heater acts on objects, so the floor will be warm and the air will remain fresh. Below are the best models in all respects.
3 NeoClima NQH-1.2i
Best Price for Quartz Heater
A country: Greece (made in China)
Average price: 890 rub.
Rating (2019): 4.7
Compact (57x16x13.5 cm) floor-mounted quartz heater of medium power. It works in only two modes - 600 and 1200 W, but this is enough to heat a small room. Switching is done using two simple buttons by changing the “on/off” position. As safety measures, the manufacturer has provided protection against overturning and overheating.
Users consider this model primarily because of its low cost with good technical characteristics. They like that the heater is compact, lightweight, does not take up much space, and is easy to move around the apartment. Not least of all is the safety of the device. The disadvantage is that the electrical cord is short (1 meter) - the heater must be installed next to an outlet or use an extension cord.
- low price;
- fast heating;
Flaws:
- short cord;
- strong heating of surfaces directly in front of the device.
2 Polaris PQSH 0208
Compact and efficient
A country: Russia (assembled in China and Russia)
Average price: 1162 rub.
Rating (2019): 4.8
The most compact among infrared quartz heaters. But despite its small size and modest power (800/400 W), it is capable of significantly increasing the air temperature in fairly spacious rooms up to 20 m2. Judging by the reviews, he does it quite efficiently and quickly. Light weight allows you to install it anywhere in the apartment - you can put it on the floor, on a table. There is no possibility of wall mounting; this is not provided for by the design. But you don’t have to worry about safety - the heater automatically turns off if it overheats and tips over.
It was not possible to find negative reviews about this model on online shopping sites and forums. Considering the low cost of the heater and its compact size, it copes with the task perfectly. According to buyers, the device quickly gives a feeling of warmth and consumes a moderate amount of electricity.
- compact dimensions;
- fast heating;
- protection against overheating and overturning.
There are no disadvantages or they are so insignificant that users do not mention them.
1 Noirot Royat 2 1200
Best Wall Mounted Quartz Heater
Country: France
Average price: 8000 rub.
Rating (2019): 4.9
The Noirot Royat heater has compact dimensions and is easily mounted on the wall. This is very convenient, because... limits access to small children and warms up the room faster. The model is equipped with a special rope that regulates the temperature. The main advantage of Royat 2 1200 is its economical energy consumption. The design of the body allows you to change the angle of inclination. An infrared heater quickly affects surrounding objects, heating them. The radiation is absolutely safe, the device does not dry out the air, and therefore does not have a negative impact on human well-being.
Advantages:
- convenient design;
- easy to attach;
- safety;
- does not dry out the air;
- warms up quickly;
- compact sizes.
Flaws:
- a special cable is required;
- hung in a certain place on the wall (1.8 m from the floor and 40 cm from the ceiling).
The best premium heaters
This category may include heaters of all types - fan heaters, oil, infrared. We have separated them into a separate group due to their high cost and improved functionality. Premium class heaters don’t just heat – they are extremely convenient to use thanks to the built-in timer, remote control and other options.
3 Veito Blade S
Powerful heater for areas up to 50 m2
A country: Germany (manufactured in Turkey)
Average price: 25,500 rub.
Rating (2019): 4.7
Expensive, but high-quality infrared carbon heater, designed for large areas up to 50 m2. It is quite enough to heat an average-sized apartment. If the serviced area is smaller, the power can be reduced - there are four modes in total. Since the control is electronic, they can be changed using the control panel. Otherwise, the operation of the device is also very convenient - you just need to set the required temperature once, and then the thermostat will maintain it. And the built-in timer will turn the equipment on and off at the specified time.
The device is very compact (90x13x9 cm), weighs only 2 kg, is wall-mounted, its installation does not present any difficulties even for those who have never had to do this before. The manufacturer also took care of safety - there is a protective shutdown in case of overheating and a waterproof housing.
Advantages:
- heating area up to 50 m2;
- fast heating;
- presence of a timer and remote control;
- compactness.
Flaws:
- You cannot set the exact temperature;
- high price.
2 Noirot Melodie Evolution (Mini-plinth) 500
The best convection heater
Country: France
Average price: RUB 32,318.
Rating (2019): 4.8
Noirot 500 is a convection heater designed to maintain optimal temperature over a long period of time. Can be installed in any room, including the bathroom. Thanks to its small dimensions, it fits even in narrow spaces. The manufacturer took care of the functionality of its device. During power failures, the heater remembers the desired temperature, and an accurate thermostat always controls energy consumption. The device is safe to use, because its body does not heat up and has no sharp elements.
Advantages:
- high protection class;
- there are no sharp corners;
- the body does not heat up;
- good feedback;
- silent;
- maintaining optimal temperature;
- fast heating speed;
- small height.
Flaws:
- high price.
1 Dyson AM09 Fan Heater
The most functional fan heater
A country: UK (made in Malaysia)
Average price: 26,900 rub.
Rating (2019): 4.9
The Dyson AM09 is a unique multifunctional device. Thanks to its well-thought-out security system, it is chosen by many families with children. The device occupies a separate place in the rating because of its versatility - in summer it cools, in winter it warms up the room. Another important advantage is the unique design. Thanks to it, there are no heating elements or rotating blades that are dangerous for children in the public domain. Equipped with useful functions: climate control, timer. Immediately after switching on, the fan heater quickly and evenly warms the room. The included remote control allows you to control the heater without getting out of bed. Has many positive customer reviews.
Advantages:
- stylish design;
- versatility (cooling in summer, heating in winter);
- high-quality construction;
- thoughtful management;
- fast cooling/heating;
- swivel mechanism;
- functionality;
- safety.
Flaws:
- high price.
Central heating may not be enough to heat your home in harsh winters. Which heater is better to choose for your home so that it quickly releases heat and does not consume too much energy? This question is relevant for any family. Nowadays, many different types of heaters have appeared, differing in the principles of their operation. Before purchasing, you should familiarize yourself with the types of devices, their advantages, disadvantages and other nuances. Most household heaters are powered by electricity. To minimize energy costs and at the same time stay warm, you need to know how certain devices are designed and which one will be the most effective for certain conditions. For example, choosing a heater for a summer house will differ significantly from choosing a device for heating a living room in an apartment. So, let's look at the main types of heating devices, their pros and cons. Fan heaters come in large and small sizes. They are very popular due to their affordable price and efficiency. A metal spiral, tubular heating element or ceramic plates are used as a heating element in such devices. A fan is installed at the rear. When turned on, the heating element quickly reaches a high temperature, and the fan actively blows warm air out. Due to convection, the room is heated very quickly. Within 15-20 minutes you can feel the temperature in the room increase. Most models are equipped with a power and temperature controller, and also have a function to turn off the fan if necessary. More expensive devices have the option of ionization and air humidification, the possibility of remote control, a timer, and a rotary mechanism. Modern fan heaters are available in a wide variety of designs: horizontal, vertical, oval, square, rectangular, floor and wall. The body of most devices is made of plastic. Despite some disadvantages, a fan heater will never be superfluous in the house. It is ideal for quickly heating small spaces and specific areas. But it is not suitable as a heating device for constant use during the cold season of the year. For this purpose, there are more practical and silent types of heaters. For those looking for energy-efficient heating devices, oil heaters are the best choice. The design of such devices is similar to central heating radiators and is designed for floor installation. Inside the sections there is a thermostat and mineral oil that can retain heat for a very long time. Models may have different numbers of sections. Thus, everyone can choose the optimal size unit. Among the assortment you can find devices with built-in fans located on the side of the case. All modern models are equipped with multi-stage temperature controllers. There are devices equipped with timers and other “tricks”. These types of heaters are similar in their operating principle to fan heaters. The convector takes in air from outside, passes it through the heating element and expels it already warm. The devices consist of a rectangular body with holes at the top through which air circulates. The difference with a conventional fan heater is that the air flow in convectors occurs due to the process of natural convection. Most manufacturers try to use a ceramic heating element that does not burn oxygen and dust so much. To choose the right heater, you need to determine exactly for which room it is needed. When choosing a heating device for a small apartment, take into account factors such as: For a small apartment with sealed windows and weak central heating, a convector or oil heater is suitable. It is worth taking into account that heating 1 sq/m of area requires 100 W of device power. Therefore, if a room is 10 sq/m, to heat it you need a device with a power of at least 1 kW. If there are 1 or 2 people living in an apartment, you can choose a fan heater or an IR heater. For a large house, one device is unlikely to be enough. Convectors are the most effective choice for private homes. They can be hung in different rooms, they will not disrupt the aesthetics of the interior and will not “eat up” too much energy. As a rule, people do not spend much time at dachas during the cold season. A practical solution would be fan heaters or IR heaters. They provide heat almost instantly and quickly warm the room. For those who live in the country for a long time, we can recommend an oil device. It will gently warm the air and, if there is a timer, will not require too much energy. Directly to the children's room or wall convectors are recommended. They are as safe as possible: they do not burn, will not turn over, and do not make noise. The devices have multiple settings and allow you to adjust the temperature at any time of the day or night. This is the best choice for a home with children. The bathroom has high humidity and is a non-residential space. This means you need a device that will quickly heat up and reduce the humidity level. Fan heaters are best suited for this purpose. For the bathroom, you should choose models with a high degree of tightness and insulation of the electrical system. The properties of a home heater in terms of heating level depend not so much on its system as on its power. Therefore, it is impossible to accurately answer which heater heats better. Although if we compare oil and infrared devices, they really have completely different operating principles, but this does not affect the degree of heat emitted. On average, for a living space up to 10 sq.m. with good thermal insulation, a 1.5 kW heater will be sufficient. If the apartment is cold, with high ceilings and concrete walls, then you should choose a more powerful device (up to 2-2.5 kW). For those who are thinking about which company to choose a heating unit, we present a rating of manufacturing companies. The best manufacturers of oil heaters: The best convector manufacturers: The best manufacturers of IR heaters: The best manufacturers of fan heaters: In terms of efficiency, heaters can be distributed as follows: The efficiency of heating directly depends on the power and dimensions of the device, as well as on the room itself. Brick walls warm up faster than concrete walls, and rooms with high ceilings take longer to warm up than rooms with low ceilings. We present a brief overview of popular heaters with good characteristics, ideal for residential buildings and apartments.Fan heater
Advantages of fan heaters
Flaws
Oil heater
Convector
Which heater is better to choose
Heater for apartment
Heaters for home
For the dacha
For children's
For bathroom
Which heater provides the best warmth?
The best manufacturing companies
Which heaters are the most economical and efficient?
Top heaters
Oil model with heating power of 1500 W. The unit is capable of heating up to 20 sq.m. within a couple of hours. living space. The radiator has 7 sections, an adjustable thermostat, protection against overheating and falling. Type of placement – floor. The average price of a heater is 2300 rubles.
Another good floor-mounted oil heater with a maximum power of 1500 W. It also has 7 sections, several stages of temperature control. There is a power indicator light on the outside. There is a convenient compartment for storing the cord at the bottom, and a handle at the top for comfortable movement. The design is made in dark color. Estimated cost – 1900 rub.
This is an electronically controlled convector model with a power of up to 1500 W. The unit can be wall mounted or installed on the floor. The thermostat has a high degree of protection against power surges, overheating, and moisture. The LED display shows the selected settings. An excellent model in all respects – you won’t find a better one for your home. You can buy Noirot Spot E-5 1500 for RUB 8,000.
The compact convector heater is designed for a room no larger than 13 m/sq. It can be installed on the floor or mounted on the wall. Control type – mechanical. The housing is protected from moisture, and the heating element is protected from overheating. The model is suitable for a nursery, as it is safe for the child. The device has an economical price - 2300-2500 rubles.
The convector heater is designed for an area of up to 20 m/sq. The model has an electronically controlled display. The indicator light comes on when turned on. The sealed housing reliably isolates electrical elements from moisture. If the unit overheats, it turns off automatically. You can place the convector on the wall or install it on the floor by attaching wheels to it. The average cost of the model is 7500 rubles.
The 2500 W oil heater has 11 sections and is designed to heat a room up to 25 square meters. meters. For ease of movement, the device is equipped with wheels and a comfortable handle. The model has several degrees of protection and an adjustable thermostat. There is a light indicator and mechanical switches on the case. When heating, the unit does not make the slightest noise. You can buy UNIT UOR-123 within 2800 rubles.
The electric convector is also aimed at heating a large area - 20-25 m2. The monolithic body protects internal mechanisms from moisture. Electronic control allows you to configure the heater at your discretion. The device has 2 forms of placement - on the floor and on the wall. The model is suitable for a large apartment or house. Average price – 9000-9500 rub.
The convector type heater is made in a black casing. The model is equipped with electronic control, remote control, display, indicator light. The power level of the device is 1500 W. The device will quickly heat a room of 15-18 m2. The device provides protection from moisture, frost and overheating. The cost varies between 4600-5000 rubles.
The fan heater is available in several colors and has a power of 1200 W. The compact rectangular case does not take up much space. You can install the device on the floor or on a cabinet. The model has overheating protection. The temperature level is adjustable. In summer you can use the device as a regular fan. Average price – 4000 rub.
Our rating is completed by another convector model with a power of 2000 W. Among the advantages, we can note such options as shutdown when overheating, several stages of temperature control. The moisture-proof housing allows you to place the heater even in the bathroom. Installation, like most convectors, is wall and floor. The approximate price of the model is 10,000 rubles.
We hope that the review will help you choose the most optimal heater for your home. Before purchasing, be sure to ask the seller for a fire safety certificate for a specific model and a warranty card.
Absolutely any heater will dry out the air in a closed space. If you intend to use your heating device frequently, a smart decision would be to purchase an automatic air humidifier. Low humidity levels are harmful to health and are especially contraindicated for allergy sufferers and asthmatics.
| Name | ||||||||||
| Type | oil radiator | oil radiator | oil radiator | thermal fan | ||||||
| Heating area | 20 sq.m | 20 sq.m | 20 sq.m | 13 sq.m | 20 sq.m | 23 sq.m | 25 sq.m | 20 sq.m | 15 sq.m | 20 sq.m |
| Heating power | 1500 W | 1500 W | 1500 W | 1000 W | 1500 W | 2300 W | 2000 W | 1500 W | 1200 W | 1200 W |
| Protective functions | overheat shutdown | frost protection, waterproof housing | waterproof housing | overheat shutdown | waterproof housing | Frost protection, overheat shutdown | overtemperature shutdown, tip-over shutdown | overheat shutdown, waterproof housing | ||
| Price | from 2400 rub. | from 2100 rub. | from 8500 rub. | from 2850 rub. | from 5000 rub. | from 3300 rub. | from 8100 rub. | from 4600 rub. | from 4700 rub. | from 11200 rub. |
| Where can I buy |
- These are heating devices that transfer the heat they produce to surrounding objects through infrared radiation. This radiation, like sunlight, is invisible, is not absorbed by the air and reaches the lower part of the room without loss, warming up the floor, furniture, walls and interior elements located in the coverage area of the device. In infrared heaters, up to 90% of the energy is converted into a stream of long-wavelength heat rays and only 10% is spent on heating the air next to the heater.
Thus, the heat from the infrared heater is distributed evenly throughout the entire radiation zone, does not depend on air flows and ceiling heights, and creates comfortable conditions for people by heating the floor, and not the air at head level.
Thanks to this principle of operation, an infrared heater can be used where another heating method is difficult, impossible or economically unjustified: in rooms with very high ceilings or large heat losses (ventilated, heavily glazed, etc.); in semi-open and open verandas, terraces, halls; on open air; in rooms where zonal or even spot heating is needed. Other advantages of infrared heaters include efficiency, convenience, safety, ease of use and maintenance, compactness and noiselessness.
A wide range and range of uses means that for each specific case of installing an infrared heater, it is necessary to make a calculation and select the device model that will optimally satisfy the heat needs. A model for an industrial warehouse, an open pavilion or a small cafe will differ significantly in characteristics.
How to choose an infrared heater?
The choice of heater will depend on several main criteria:
- type of premises (residential, office, trade pavilion, warehouse, etc.)
- heating options (full, additional, zone, spot, etc.)
- installation heights (ceiling heights),
- installation (ceiling, wall, built-in)
- distances to people present in the room
- energy source (electricity, hot water, liquefied gas, diesel)
Power of infrared heaters
Having first determined the total power for heating the room as a whole, you can then select the power and number of heaters needed to distribute heat evenly in the room. In order to calculate how much heater power is needed for your room, the power density is calculated (the amount of power per square meter of heated area), which is measured in W/m2. The table shows approximate power densities to achieve the desired temperature in rooms with different thermal insulation.
The temperature indicated in the table may seem insufficient, but it should be remembered that with infrared heating, the ambient temperature feels 3-4° C higher than it actually is.
Heating area of infrared heaters
These recommendations for choosing infrared heating are of a general nature and cannot take into account all the features of your actual operating conditions. For advice and calculations, please contact our specialists.
During the cold season, residents of private houses think about a comfortable indoor temperature. But among the many heating equipment, it is difficult to choose the best option. Many people choose electrical products that have many benefits and consume a small amount of electricity. Let's consider which heater is the most economical for a private home in terms of electricity.
Which heater is the most energy efficient?
Before the start of the heating season, it is worth considering in advance which equipment will be optimal for your home.
There are several types of heaters:
- Electric (convector).
- Infrared.
- Micathermic.
- Air conditioner.
- Ceramic plate (panel).
Electric heater in the interior
Electric convector
Its operating principle is similar to that of an oil cooler. Air circulates through the heating element. The heated air rises and, after cooling, falls to reheat.
The most popular are Atlantic models. The power of convectors varies from 0.5 to 2.5 kW. To heat a room of 20 sq. m. it will take 4-5 hours.
Electric convector Atlantic
Infrared heater
Oil and electrical products have been replaced by a new type of heating equipment. The energy consumption of such equipment is significantly less. A quartz emitter is a heating element that heats up and transfers heat to nearby objects. Such equipment does not heat the air. It is suitable for quickly heating a room. But it is not able to efficiently heat the entire house for a long time.
The infrared device can be installed outdoors. The equipment can be mounted to the ceiling or installed on legs. For heating a room up to 20 square meters. m. it will take 2 hours.
Popular models: Eko, Saturn, Beko, etc. The product consumes an average of 90 W per sq.m.
Infrared heater
Micathermic heater
This product is distinguished by its economy and efficiency. It was developed using new technology and was released not so long ago. The equipment was previously used in astronautics and medical institutions. The equipment can be installed on the ceiling or wall.
A micathermic heater heats up efficiently because it has several plates that are coated with mica. It is safe as it does not get hot. Objects around the device heat up evenly.
There is one drawback in the equipment - high cost. A high-quality model is a product from Polaris with a power of 1.8 kW.
Micathermic heater Polaris
Air conditioner
The air conditioner is distinguished by its efficiency. Often used to heat a country house. The equipment consists of an indoor and outdoor unit. Heating a room is different from other heating devices.
The air conditioner is powered by a heat pump. It takes warm air inside the room using a heat exchanger. Therefore, even at negative temperatures, the air heats up and enters the house already warm. Freon is used for heating. Under the influence of pressure, the gas passes through the indoor unit in the heat exchanger and heats up to 80 degrees. After this, the freon goes to the outside and returns to the gas under low pressure. After boiling, it flows again into the indoor unit.
From 2 to 5 kW of electricity is consumed per hour, depending on the model. Air conditioners can heat houses even with a large area. Popular models: Samsung, Daikin and LG.
Air conditioner LG
Ceramic panel
Such equipment is also considered economical. The device looks like a ceramic plate. It works on the principle of long-wave infrared radiation. Excellent for different interiors, as it has a steel heat-conducting box. The panel can be installed on a wall or ceiling.
To calculate electricity consumption, it is necessary to take into account the dimensions of the device. On average, the panel consumes 0.2-2.5 kW per hour. Room 20 sq. m. can fully heat up after 2 hours.
Ceramic panel
Which heater consumes less electricity for a summer house and other homes?
Based on many experiments, we can single out one type that consumes less electricity. Such a device is a convector. The operating principle is similar to an oil radiator, but is distinguished by its safety and modernity.
Air circulates through the heating element, which is located in the convector. Thus, heat exchange occurs. The convector can be left on for a long time unattended, as it is one of the safest devices.
Such heating equipment is ideal for a country house. It does not dry the air, and the heating temperature cannot exceed 60 o C. After turning on the convector, the room will begin to heat up in 20 minutes. It consumes 25% less electricity than other heating devices.
The convector is considered the most economical for the home.
How much does an oil heater consume per day?
This type of heater burns a small amount of oxygen and consumes little electricity. In addition, they are not as fire hazardous as other devices.
The disadvantages are high cost and heavy weight. On average, an oil heater consumes 750W per hour. More powerful heaters consume about 1 kW. But you can find devices with less power.
Since the device operates several hours a day, electricity consumption is significantly less.
Oil heater
The higher the power of the device, the more electricity it consumes. When the device is turned off and in rest mode, it does not waste energy. Despite some disadvantages, there are more advantages. That is why it is popular among residents of private houses. You can calculate the amount of electricity consumed after 1 month of using the device.
Calculation of the power of different types of heaters per room area
Heaters are used not only in country houses, but also in apartments. In the fall, when cold weather sets in, the heating in the apartment is not yet turned on, so many people purchase electrical products. But in order not to receive a large electricity bill, you need to calculate the power and consumption of the device in advance.
To calculate, you should take into account the area of the house or apartment and the number of heating appliances. It is necessary to calculate the power of radiators using a special formula.
kWt = 0.277*c* ϱ *P*h*(t2-t1), where c is the specific heat capacity, ϱ is the air density, P is the area, h is the height.
As a result, you will receive the amount of heat needed to heat the house and the required power of the appliances.
Power table per room area
The formula must take into account the following points:
- Wall material and thickness. In a house with thick walls, heat loss will be minimal. And with thin walls, heat goes outside.
- Type of radiators. Batteries can be infrared or oil.
- Insulation of walls.
- The quality and quantity of windows in the house. A large amount of heat escapes through windows. Therefore, it is important that the windows are of good quality. In this case, the heater can be heated to a low temperature. And if the windows are ventilated, then you need to turn on the device at the maximum temperature.
In order to correctly calculate the power of the required heater with all the nuances, you can use a calculator.
Quartz heater power
Such equipment consumes a small amount of electricity. The average consumption is 0.5 kW per hour. The type of heater is different from the same oil heater. A special stove contains a heating element that heats up and emits heat. Heat is distributed evenly over the entire area.
Quartz devices have the following advantages:
- The heater does not dry the air. Therefore, people in the room will feel comfortable.
- Beautiful appearance.
- Long service life.
- The air in the house remains fresh and clean.
- The device does not heat up to high temperatures. It can heat up to a temperature of 95 o C. Therefore, such a product can be considered not a fire hazard.
- The equipment accumulates heat for a long time. The appliance heats up and remains warm for a long time. It will take 20 minutes for the quartz product to fully heat up.
Quartz heater
Oil heater power
Based on the calculations, you can determine the power of the device. But it is worth considering the fact that such heaters distribute heat unevenly.
The air around the appliance becomes very hot, but in remote parts of the house the air remains cool.
How much energy does an infrared heater consume?
On average, such a heater consumes 0.5 kW per hour. This indicator indicates a high efficiency compared to other heating devices. If it works for about 10 hours a day, then it will consume 150 kWh per month. This electricity consumption can be considered a good indicator.
When purchasing a heater, you need to pay attention to the electricity consumption and power of the device. When choosing an infrared heater, power calculations must be made taking into account the area of the room, so as not to overpay for unnecessary electricity consumption.