How to install a fence from corrugated sheets with your own hands. Instructions for building a fence from corrugated board with your own hands with and without a foundation

Any area must be protected from prying eyes by a reliable fence. It can be constructed from different materials. The most popular and budget option is a fence made of corrugated sheets.

It is suitable for those who want save on material and do not spend a lot of time building a fence. How to make a fence from corrugated sheets with your own hands is discussed in this article.

Advantages and disadvantages of a fence made of corrugated sheets

Corrugated fence has a number of advantages before others:

corrosion resistance;
strength;
attractive appearance;
ease of installation;
relatively low cost of material;
durability;
minimal care.

An important advantage of the design is the small amount of excavation work and ease of installation.

If you didn’t find a helper for you, don’t worry! With a fence like this I can handle it on my own.

The benefits of a fence made from such material include its opacity. This is important for free movement on the site. At the same time, you don’t have to be in sight of your neighbors.

Cons of corrugated sheets:

Material installation options

Installation without welding machine

What if a welding machine is not available, or a self-taught master does not know how to work with welding? You can install a fence without welding, with the help of auxiliary: brackets, bolts, self-tapping screws and a construction clamp.

With this type of fastening, you cannot use parts that can damage the protective coating.

In addition to profiled sheets, transverse fencing profiles called joists are used. It’s easy to attach the logs to the post: a bracket and a construction clamp will allow do without using a welding machine.

The following advantages are highlighted in using the bracket:

Welding use

Welding work provides metal elements of the fence reliable fastening. After welding the fasteners, the surface is treated with a special primer to secure the work done and give the product greater thickness.

Brick pillars

A fence with posts (example in the photo on the left) is chosen by the owners of households who What is important is the highest stability of the sheets and a respectable appearance.

Just like for metal pillars, markings are made for future masonry for brick fortifications.

Craftsmen make a hole into which concrete is poured. This procedure is important because large weight of the future structure. The building material is laid out in an area of 1.5 by 1.5 bricks.

Throughout the laying of a brick pillar, a level and plumb line are used for accuracy.

At a height of 0.2-0.3 meters and 1.5-1.7 meters from the top edge of the soil, they are laid inside the column brackets to support the structure. After the masonry is completed, the logs are welded to the brackets and covered with a protective coating.

After completion of the masonry, the surface of each pillar covered with a special roof to protect brick pillars from precipitation.

Fence with and without foundation

Sometimes the owner of the future fence decides to install a fencing structure made of profiled sheets without a foundation. Before making such a decision you need to consult a specialist, which will tell you about the type of soil and its swampiness.

If there are changes in the area, strong winds and watery soil, installation cannot be done without a foundation.

If the soil layer allows this type of construction, it is best to use a profile pipe 100 mm in diameter. The height of the pipe is selected based on the planned height of the fence. The top of the support is welded to prevent moisture from entering.

A building with a foundation is much more reliable than without it. If you have the financial opportunity and extra time, it is best to dig holes. They are filled with gravel mixed with broken bricks. The hole is filled with cement, with pre-fixed supports.

Fixed pillars should not be touched for four days until the cement is completely dry.

Step-by-step instructions for installing corrugated sheets

Building a detailed diagram

Work with a profiled sheet begins with drawing a detailed diagram, which will take into account all the points:

location of fence supports;
unevenness on the ground surface;
The height of the fence and the length of its individual sections.

At this stage, you need to decide what type of fence will be on the site: continuous or sectional. Continuous construction involves a continuous arrangement of corrugated sheets around the entire perimeter.

A sectional fence is divided into segments separated by pillars.

Material selection

When choosing a material, you need to pay attention to the height of the sheet and its thickness. The material should not be too thin.

Polyester. Protects the product from exposure to ultraviolet radiation and temperature changes. However, the relatively small thickness of the polyester coating will not protect against external damage.
Plastisol. The coating is thick and resistant to all types of impact.
Pural coating. This coating is made of polyurethane-polyamide paint. Able to withstand not only mechanical, but also chemical influence.
PVDF coating. New development in the field of coating materials. Withstands colossal ultraviolet loads and is resistant to all types of damage.

For a country house located in a temperate climate, the best choice would be a fence with plastisol or polyester coating.

Carrying out foundation work

Carrying out foundation laying work - one of the important stages, because it is at this moment that places for future pillars are marked. And the evenness of the structure will depend on the correct location.

First produced marking the future fence. For this procedure, you can use pegs with a rope attached and a hydraulic level for accuracy. Then the places for installing the pipes are outlined. In the indicated places, recesses are made (recommended depth - 1 meter).

Installation of pillars

The pillars serve as support for the profiled sheet. From the strength of the material from which they are made, the reliability of the fence depends. The height of the pipe should be selected taking into account the depth to which the support will go into the hole.

Pillars made of profiled pipes 40x20 are popular. The thinner the corrugated sheet, the smaller the distance between the supports should be..

A budget option for supporting a fence is wood. Wooden poles are less in demand due to their fragility. However, they are able to withstand significant loads. With this choice, you need to carefully treat the pillars with an antibacterial solution.

Pillars needs to be adjusted in height. In relatively flat terrain, the fence along the horizontal line should not have significant deviations or differences. To do this, use a watery level. A mark is placed on the posts and the extra centimeters are cut off with a grinder.

The pillars are installed in pre-dug holes and filled with concrete with the addition of crushed stone. The surface of the concrete is covered with a film to prevent moisture from entering and speed up drying.

Installing poles is difficult, but it can be done with your own hands. The main thing is to be precise in your work.. It is recommended to carry out installation together with an assistant.

After the concrete has successfully dried the surface of vertical posts and logs is coated with paint or primer. If you do not carry out this procedure in advance, then later, when the sheets are already tightly held, they will interfere with surface treatment.

Fastening corrugated sheets

It is best to install corrugated sheets with a partner. One holds the bottom of the sheet at the level of the tensioned thread, and the other secures the surface with a screwdriver at the top.

After checking that the sheet is horizontal, it is strengthened in three or four more places. The sheets are fastened with self-tapping screws or bolts. Can Make the job easier with a screwdriver with low revs. Self-tapping screws must be screwed through one wave.

Despite the fact that a self-tapping screw can be easily screwed into a corrugated sheet, it is better to make a preliminary hole in the material with a diameter slightly larger than the diameter of the self-tapping screw. This is important when the metal expands linearly due to sudden temperature fluctuations.

Perpendicular screwing of the self-tapping screw- a necessary condition for attaching the profiled sheet. For better sealing of the fastening, special neoprene washers are used, which should fit tightly to the sheet.

For installation accuracy, use a level. It is important to install the first sheet evenly, since all other work will be carried out from him. The sheet is attached in four places with a distance of 20 cm from the edge. The next sheet is laid with an overlap in one wave.

To accurately hit the crossbars with a self-tapping screw, you need to pull the string from the outside at their level.

It is unacceptable to make a minimum number of fastenings: due to gusts of wind, the fence will be subject to loosening.

The final stage of installation is the installation of the end strip. It will cover the edges and create the appearance of a finished structure.

We quickly and easily build a fence from corrugated sheets without a foundation - video instructions:

In domestic realities, fencing plays an important role in the arrangement of private households. The owners feel more comfortable and safer, having protected their territory from the attention of prying eyes. Some architects and designers even believe that the fence is the main element of the land.

If previously the choice of designs and materials for building a house fence was very modest, today’s assortment makes you think seriously. Which option should you choose to make it reliable, beautiful and at the same time economical?

One of the most popular materials for arranging a fence is a profiled metal sheet, or as it is also called, corrugated sheet or corrugated sheet. The kit will cost very little, and the assembly process is so simple that even a non-professional can do it.

So, what are the advantages of a fence made of corrugated sheets? How to calculate the amount of material needed, what you need to buy, and, finally, how to build and install a fence from corrugated sheets with your own hands? Let's talk about this and much more in more detail.

What are the advantages and disadvantages of building a metal fence from profiled sheets?

Let's start by listing the advantages of fences made of corrugated sheets. A lot of them.

Relative lightness of sheet metal.
Rigidity and strength. It cannot be said that the reliability of such fences is comparable to a concrete wall, but overcoming them is not so easy.
Corrosion resistance.
Slow and uniform surface burnout. Can be compared to the quality of car painting.
Cheapness. Corrugated sheeting is one of the most inexpensive building materials, available to citizens of any income level.
Aesthetics. Manufacturers offer profiled sheets for fences of different types and shades, plain or with a pattern or ornament, which allows you to emphasize the style of a private home. For greater effect, combined fences are built from stone, brick, wood and corrugated board.
Simplicity and speed of installation. In order to build such a fence, you do not need to have a solid arsenal of equipment or special skills. The technology for installing a fence made of metal corrugated sheets is very simple. The most difficult stage will be welding, but if desired, fastening can be done using alternative methods.
Providing personal comfort. Unlike the same picket fence, a fence made from corrugated sheets turns out to be continuous, which protects the interior space from prying eyes. The material is available in different sizes, so the height of the fence can be chosen at any time. By the way, such a fence will also perform a small soundproofing function.
No maintenance requirements. The polymer coating has dirt-repellent properties, so it cleans itself perfectly even in rain. If desired, the fence sheets can be washed using any household chemicals and rinsed with water from a hose.
Long period of operation. If all installation requirements are met, the service life is estimated at several decades.

If we talk about the disadvantages of fences made of corrugated sheets, then we can highlight one, but significant one. They still do not provide one hundred percent protection from external intrusion. It is easy to cut a hole in a section or put strong physical pressure on it and simply demolish it.

Where to start preparatory activities

So, the decision has been made. But it’s too early to go shopping for building materials. Even a professional with impressive experience cannot determine the required number by eye. Preparatory activities will take no more than an hour.

At the first stage, it is necessary to indicate the location of the fence. Where its corners will be, pegs are driven in, and a construction cord or fishing line is stretched between them. They are the key reference points.

Now, along the length of the cord, using a tape measure, measurements are taken of the length of the designed fence. These are the main figures that need to be recorded, and from which all subsequent calculations will be based.

Installation of fencing made of profiled sheets. Detailed diagram and drawings

To visualize a future fence for a city estate or dacha made of corrugated sheets, it is recommended to start by creating a sketch of it - a rough drawing that will help you imagine what the structure will look like. But the drawing diagram is the main document that will significantly simplify the calculation of the material.

Based on the type of structure (solid or sectional), they begin to construct a drawing. Apply on it:

fencing location. This is done in order to take into account the features of the terrain, the presence of foreign objects, access roads, and locations of gates and gates before the start of construction;
elevation changes. Manufacturers produce profiled sheets of various lengths (multiples of 5 cm), therefore, in order for the final fence to be the same height, this circumstance should be taken into account when purchasing building materials;
all dimensional characteristics;
location of posts or supports. If you plan to build a sectional structure, you must remember that the size of one section is determined by the width of the sheet and contains 1, 1.5 or 2 units.

General scheme for constructing a simple fence made of metal profiles

Fencing designs can be very different: from elementary ones with posts to those that require pouring a strip foundation. We will consider the simplest option with the installation of separate metal support pillars.

A hole is dug under each support, racks are installed in them, after which the hole is filled with sand and gravel mixture and concreted. Logs are attached to the racks, to which profiled sheets are subsequently screwed. All this is shown in the diagram.

Selection of materials and tools

To build a fence from corrugated sheets, you will need the following materials and tools:

actually, corrugated board;
support posts or pillars;
cross beams;
fasteners – hardware (bolts, screws, self-tapping screws), brackets;
caps for supports or pillars and decorative end strip;
dye;
additional materials - cement, gravel, sand;
tools - level, plumb line, screwdriver, welding machine, formwork materials, containers for mortar and others.

Let us dwell in more detail on the features of choosing elements of each of the listed categories.

Which corrugated sheeting is suitable for building a fence?

Manufacturers offer a wide range of profiled sheets. But not everyone is suitable for building fences. When purchasing, you should pay attention to universal products marked “C”, which are used for the construction of fences and walls. Less common are models marked with the letters “A”, which can also be used for this purpose. Corrugated iron with markers “H” and “HC” is considered more of a roofing raw material, so it is not worth buying it for a fence.

The next indicator that should be taken into account is the height of the rib. In the marking, the numbers indicating this characteristic follow the letter designation of the sheet type. They indicate the wave height in millimeters in the range of 8-35 mm. The higher the number, the higher the rigidity of the sheet. If the building will be located in an area with strong winds, it is better to purchase C10 or even C20 corrugated sheeting.

It is important not to make a mistake with the thickness of the material. Typically, sheets with a thickness of 0.4 to 0.8 mm are available for sale. For medium-height fences, 0.45 or 0.5 mm is sufficient. If the height of the fence is planned to be higher than 2.5 m, then you should prefer a metal profile with a thickness of at least 0.6 mm. By the way, the standard fence height is 2 or 2.5 m. As for the width, the range of proposals is much wider - from 0.4 to 12 m.

Profiled sheets are galvanized and painted. The second ones cost a little more. In turn, the sheet coating is divided into polymer and powder. The latter is considered more durable, although its price is higher. Finally, the metal profile is sold with one-sided coating (galvanized on the inside) or double-sided coating (more beautiful and more durable).

What materials and in what quantity will be required for the construction of a fence from corrugated sheets

When building any fence, you cannot do without support posts. Metal pipes are usually used, although structures with wooden and stone columns are also available. Round posts should have a diameter of 60-100 mm, square posts should have dimensions of 60×60×3 mm, 60×40×2 mm or 40×40×2 mm, for gates and wickets – 80×80 mm. The easiest way is to buy ready-made pipes or piles, but you should know that the second option is only applicable for normal soils and loams. Typically, these posts are sold with a foot for mounting on the ground, a top cap to protect the edge of the support from the elements, and holes for attaching sheets. The length of the support pillars depends on the depth of their immersion in the ground and the height of the fence. It is taken into account that the sheet will be slightly raised above the surface and this backlog will be enough to cover the supports. The calculation of the required quantity is given below.

Square pipes are usually used as cross beams, the width of which should be approximately half the width of the support column. Wooden crossbars are strictly not recommended, since they rot where the metal profile is attached. You should not opt for metal corners either, since they are not able to provide adequate resistance to wind loads, taking into account the large windage of the corrugated sheet. The ideal pipe metal thickness is 2 mm (maximum 2.5 mm), since the factory specifications of fence screws are not designed to work with a thick-walled profile, and a smaller thickness will not provide sufficient structural rigidity. If the corrugated sheeting will be fastened by welding, it is allowed to use beams with denser walls. The number of logs is determined by the perimeter of the fence and the height of the fence, depending on which 2 or 3 crossbars are used.

It is important to take care of the required amount of fastening materials. Usually the connection is made using self-tapping screws 15-35 mm long (at the rate of approximately 14 pieces per linear meter), which are painted to match the color of the sheet. They have a drill tip and a rubberized washer. They can be replaced with bolts or screws measuring 20 or 30 mm. If desired, use plate holders.

Another important element without which the fence will not be perfect is paint. Firstly, you will need dye for the joists and pillars, and secondly, for the profile. In the first case, primer, paint, or a composition combining these components are used; in the second, you can get by with one can to mask damage to the coating that occurred during installation.

The finishing touch is post caps and decorative end strips. When choosing planks, you need to pay attention that their edges are rolled, which will protect the metal profile from scratches.

Additional materials and tools

The construction of a foundation for a fence made of corrugated sheets involves the purchase of materials for the production of concrete mortar - cement, sand and crushed stone. You may prefer a more economical option - a cement-sand mortar filled with old concrete, broken brick and stone.

List of required tools:

a shovel or drill with a diameter of 20 cm or more for digging holes for the foundation;
boards for formwork, if provided;
a spacious container or concrete mixer for the solution. The second option is preferable, especially since on the Internet you can find many advertisements for renting out such equipment;
welding machine. It is necessary when choosing the appropriate method of attaching the sheet to the crossbars. It is better to prefer a household unit operating from a 220 V network. If you do not have the skills, you should invite a specialist, and to save time and money, apply the markings first;
grinder with cutting and grinding discs for cutting pipes and cleaning them before welding;
metal scissors, used to cut profiled sheets. A grinder will not work in this case, since the metal profile overheats greatly and, as a result, begins to rust after a short time;
a screwdriver with an M8 attachment and a magnetic holder for working with roofing screws;
tape measure - for taking measurements, felt-tip pen - for markings, building level and plumb line - for monitoring the position of supports, joists and sheets, as well as rope, protective gloves and glasses.

Calculation of material for the fence

Before you go shopping for the listed materials and tools, you need to calculate the need for them. You shouldn’t do this “by eye”, so that, on the one hand, you don’t overpay, and on the other, you don’t have to go shopping for products that have suddenly run out.

Calculation of the number of sheets

Depending on whether the designed fence will be continuous or sectional, the required number of sheets is calculated as follows:

solid. In this case, the total length of the fence is divided by the useful width of the sheet (taking into account the overlap). Rounded up;
sectional - if the width of the section is equal to the width of the sheet, then the total dimension of the sheet is taken into account. If you plan to install one and a half or two sheets in one section, then take into account the useful width.

Corrugated sheeting can be installed horizontally or vertically. In the first case, the height of the fence will be equal to 1, 2 or 3 sheets, in the second it is chosen arbitrarily.

When purchasing a metal profile, relying on the concept of its area is pointless. You need to start from the width and operate with pieces.

Calculation of the number of pillars

The number of posts is also calculated based on the type of fence being constructed and the specified distance between the supports:

solid. The number of posts is determined as the quotient of the total length of the fence divided by the interval between supports. The average value is 2-3 meters. Due to the significant windage of the profiled sheet, it is not recommended to increase this distance, since additional reinforcement will be required in the form of thickening the support pipes and increasing the number of lags;
sectional. The number of posts required is determined by the number of sections planned. When designing, it is recommended to assign a section length equal to the total or usable area of the metal profile, that is, one or 1.5/2 units, respectively.

It is imperative to provide posts in the corners of the fence, as well as in the places where gates and gates are installed.

When making calculations, rounding is done downwards. The adjustment is made by changing the distance between the supports.

Calculation of the number of transverse joists

the fence is below 2 meters, the number of logs is 2. In this case, the distance from the edges of the sheet should be approximately 30 cm;
the fence is higher than 3 meters, the number of logs is 3.

Thus, the total molding of the crossbars is determined by multiplying their number by the perimeter of the fence.

Calculation of additional materials:

brackets. The quantity is determined as the product of the number of support posts and the number of crossbars;
plugs for posts. Equal to the number of columns plus a couple of spare ones;
screws or other hardware. You should proceed from the consideration that the initial fasteners are made into each of the crossbars from the edges, and then - with a fastening step of two waves. It turns out that with two crossbars per sheet you will need 8 self-tapping screws, with three - 12. A standard package contains 250 products, it should be rounded up with the expectation of defects;
end strip. Equal to the perimeter of the fence, the standard length is 2 m, but taking into account the overlap, the useful length should be taken into account, equal to 1.85-1.95 m;
dye. Usually, a 50 gram jar is enough to paint a metal profile.

How to make a fence from corrugated board with your own hands. Step-by-step instructions and photo report

Installing a fence from corrugated sheets yourself is not difficult. The standard algorithm of actions is as follows:

site clearing;
pouring the foundation, installing support pillars;
lag fastening;
installation of gates and gates;
decorative design of columns;
installation of profiled sheets on the frame;
installation of additional elements;
cleaning the area.

With and without laying the foundation for the fence

The construction of fences made of metal corrugated sheets involves the organization of two types of foundations:

tape, when a trench is dug along the entire perimeter of the fence;
local, with drilling holes for support posts.

Corrugated sheeting is a fairly light material, so you can get by with a shallow strip foundation. As a rule, a depth of 30-40 cm is sufficient, and its width is determined by the size of the support posts. Pouring a strip foundation consists of the following steps:

digging a trench;
laying a sand and gravel cushion;
construction of formwork;
pouring the starting layer of concrete;
reinforcement;
final filling.

In places where the base posts are located (edges of the fence, corners, around gates and gates), the depth of the pit should be greater. The volume of the recess is calculated as a third of the height of the support post plus 10-15 cm for the pillow. Where the intermediate pillars will be located, ¼ of their height will be enough with additional volume for the sand and gravel mixture.

Installing supports without pouring a foundation is easier and faster. In this case, using a drill or shovel, a hole is dug with a depth of 1/3 or ¼ of the length of the post plus 10-15 cm, depending on where the post will stand (approximately 120-140 cm, taking into account the volume). A pillow is poured onto the bottom, which will ensure the stability of the future structure. After this, a pole is installed with mandatory control of verticality and final height. If you plan to fill the hole with stones and broken bricks, then at this stage the prepared substance is poured to 2/3 of the depth, then the concrete solution is prepared and poured. At the end of the work, a level or plumb line is used to check the correct position of the rack.

Installation of supporting metal columns from pipes and fastening of lintels

Before you begin installing corrugated fence elements with your own hands, you need to pause. After installing the pillars and filling them with solution, time should pass - from 5 days to two weeks. This is necessary for the concrete to gain strength. Even if everything was followed according to the instructions, the pipe may become dislodged. Therefore, during the entire “waiting” period, it is important to control the verticality and correct location of the supports.

Once you are confident that the posts are securely concreted, you can begin installing the horizontal load-bearing element of the fence - the log. They can be attached in two ways - welded or screwed. In addition, there are three types of connecting jumpers to supports:

end-to-end - ideal for frames of solid fences;
using a bracket – preferably for sectional fencing;
on the side of the pipe. This form ensures greater stability of the structure, since the sheet is attached to the fence not only to the crossbar, but also to the support post. This is usually done when installing sectional fences.

How to build a fence from corrugated sheets and open posts from brickwork

A sectional fence made of metal profiles with brick columns will look much more beautiful. This decision must be made at the design stage, since when choosing this option, the distance between the pillars is adjusted. In addition, you will probably have to cut the corrugated sheet to length, which will affect the overall cost of the work. Finally, pouring the foundation is mandatory.

Of course, you can do bricklaying alone, but if you lack self-confidence, it is better to trust the professionals. The main thing is to adhere to the following rules:

Decorative bricks without cracks or chips should be used as raw materials;
it is important to maintain a uniform seam thickness;
to ensure sufficient rigidity, it is advisable to reinforce every third row;
the resulting void between the pipe and the masonry must be completely concreted;
It is recommended to decorate the top of the column with a decorative cover.

How to make a fence yourself with installation of supports on a site with a slope

Uneven terrain complicates the process of erecting a fence somewhat, but not critically. When designing a structure, it should be designed to compensate for level differences.

The first tool that will help in solving the problem is pouring a strip foundation. It will even out the features of the landscape.

The second thing that can be used to visually ensure the same height of the fence is to purchase corrugated sheeting of different lengths. Manufacturers produce sheets with lengths divisible by 5 cm. This is enough to smooth out uneven terrain.

When arranging a fence in such conditions, it is important to follow two rules:

the height difference at the top edge of the fence should be the same;
It is desirable that the logs are no longer than 3 meters.

Do-it-yourself installation of a supporting frame without welding

When choosing this mounting option, craftsmen recommend using special holder plates (brackets, “crabs”), which are a cross-shaped metal structure with curved edges. They are screwed to the support posts, and the logs are already attached to them. All this is done using self-tapping screws. Fastening is carried out in stages:

The first element is installed at the desired level and secured in the chosen way (from the side or from the front). It also depends on the shape of the bracket;
the next plate is attached to the second post. To determine its position, you need to attach a crossbar with a building level lying on it. This is done for all other supports;
the logs are fixed with self-tapping screws.

It is important to take into account that, if during welding the crossbars can be joined anywhere, then with mechanical fastening the connection of the profile pipes should be exclusively at the support. If this condition is not met, the logs should be trimmed.

What screws to fasten the corrugated sheet with?

Roofing screws with a countersink tip, combined with a good screwdriver, can drill a hole without additional preparation. This is also achieved thanks to the hexagonal head of the hardware, which evenly distributes torque. The screws under the head are equipped with a rubber gasket designed to protect against moisture penetration and, as a result, protect against corrosion.

The standard diameter of self-tapping screws is 4.8 mm. The length varies, in this case you should choose 19 mm. With this size, the self-tapping screw will pass through the plane of the corrugated sheet and one wall of the cross member pipe, but will not rest against the opposite one. The production of these parts involves the use of corrugated sheet metal for the installation of fences, so their color range usually coincides with the most popular shades of metal sheets, which means choosing the right one will not be difficult.

How to properly attach a corrugated sheet to a fence using welding

It’s not difficult to build fences from corrugated sheets with your own hands. The most difficult stage is welding. You can invite a professional, but if you decide to do everything yourself, then the procedure for attaching the logs to the supports by welding looks like this:

preparation of pillars and lintels. The length is adjusted, the surface is cleaned of paint;
alignment and welding of veins. Fixation is carried out using clamps or with the help of an assistant. This is done around the entire perimeter;
cleaning and checking welds. Sagging is removed, poorly cooked areas are re-processed;
surface cleaning, coating with a protective composition, painting.

In what order should profiled sheets be attached?

The structure of the profile sheet is such that one of the outer waves is the covering one. When installing the first sheet, you should take this into account so that the covering wave of the next sheet covers its usual wave (a common installation error). Naturally, you need to make sure that the profile is screwed evenly. The distance from the soil surface should be 5-10 cm.

The profile is attached to the joists along the edges and, depending on the parameters of the fence, in the center, through two waves, in a checkerboard pattern, and so on.

Installation of corrugated sheeting using self-tapping screws on the fence must be carried out in compliance with the following rules:

fastening to the log is carried out through the lower wave, the connection of sheets - through the upper one;
tighten the screw correctly - tighten to the end, but do not overtighten;
Avoid “dismounting” of the self-tapping screw, which can damage the surface of the corrugated sheet.

Finishing, painting

After the completion of the main installation work, the final stage begins - finishing.

At this stage, the upper edge of the profile is covered with a special end cap for the fence. Its size depends on the height of the profile wave. So, for a sheet with a wave of 8 mm, choose a strip 10 mm thick with rolled edges (preferable) or 8 mm with regular edges.

Decorative covers are placed on the tops of the pillars.

At the end, the posts, logs, and surface of the corrugated sheet are coated with a protective anti-corrosion compound and painted (optional).

Cleaning up the area after construction

After the installation of the fence is completed, it is necessary to remove the area from scraps of corrugated sheets, damaged screws and other construction debris in order to emphasize the beautiful and original fence.

How much will the material and installation of a corrugated fence cost if you do it yourself or hire a third party?

What is more profitable: installing a fence made of corrugated sheets with the help of professionals or with your own hands? Let's calculate the savings that can be achieved by building a fence yourself. Initial data:

fence height – 2 m;
type of pillars – profile 60×60×2 mm;
distance between supports – 2.5 m;
logs – profile pipes 40×20×1.5 mm;
number of crossbars – 2;
corrugated sheeting – C8 one-sided, thickness – 0.4 mm;
fastening of pillars - concreting.

The cost of one linear meter with these parameters will be 6,000 rubles. specialists will charge 2,300 rubles for such work.

If the construction of a sectional fence with brick pillars is planned, then the cost of one meter increases to 13,000 rubles (including pouring the foundation). You will have to pay from 9,000 rubles for the delivery of concrete with a mixer, and another 20,000 thousand for the service. It is known that only masons charge for work approximately as much as the material costs.

Photos and videos of options for fences made of corrugated sheets

The gallery presents beautiful and original fences made of corrugated sheets. We present interesting ideas for their design and useful construction guides.

Profiled sheets are widely used in construction. But if previously it was suitable only for industrial and temporary structures, today, thanks to its improved appearance qualities, it is used for decorative cladding, fencing and roofing of private houses.

Building a fence from corrugated sheets is cost-effective, practical and simple. All work can be done with your own hands, the main thing is to choose the right materials and carry out installation in accordance with the standards, then the new fence will be beautiful and durable.

Corrugated sheets are made from sheet steel. Giving it a corrugated shape is carried out by cold rolling. A multi-layer protective coating is applied on both sides, which prevents corrosion and provides the material with an attractive appearance.

Corrugation gives a simple steel sheet rigidity and strength, while maintaining low weight and low thickness - these factors make the profiled sheet easy to work with and a reliable material.

Qualitative characteristics, such as load-bearing capacity and resistance to mechanical stress, directly depend on the characteristics of the corrugation and the initial thickness of the sheet. The finishing coat is no less important.

The higher the profile height and the greater the thickness of the steel, the greater the load the material can withstand. And the quality of the decorative layer determines the service life.

Some profiled sheets are produced without a finishing coating, but the application of base protective layers is a prerequisite, otherwise the material will very quickly lose its properties. The metal is galvanized on both sides, passivated and primed. These coatings protect the steel from the external environment and provide reliable adhesion to the decorative layer.

Advantages and disadvantages

Ease of installation - it is ensured by low weight, simple cutting and fixing;
Wear resistance and strength - service life, depending on the brand and type of protective coating, can vary from 5 to 50 years;
Cost-effective – profiled sheet is one of the most inexpensive building materials, since its production does not require large financial and time costs;
Practicality – the surface is easy to care for, no additional painting is required during operation;
Aesthetics - manufacturers are ready to offer corrugated sheeting in various colors, glossy and matte. The laconic appearance makes this material universal in use for any exterior.

Corrugated sheets are not without their drawbacks. This material is less durable than, for example, concrete, wood or brick. Scratches and dents from impacts may remain on its surface. However, the optimal combination of price, quality and ease of installation has made the profiled sheet very popular among ordinary buyers and professional builders.

Types of corrugated sheets

Depending on the characteristics of the corrugated sheet, the scope of its application is determined. To choose the right material, you need to study the markings on the inside. Sheets manufactured according to GOST are designated by the following letter codes:

Wall is intended for the design of facades and the construction of fences. The load-bearing one is suitable for roofing and floor coverings. Universal has average quality characteristics and can be used for various purposes. Products marked C and CH are suitable for erecting a fence.

After the letters in the code there are numbers: the first is the height of the profile shoulder, the second is the thickness of the steel, the third and fourth are the length and width of the sheet. If the marking has a different appearance, this means that the profiled sheet was produced according to specifications and its quality may differ from the standard.

The corrugated sheet for building a fence must have a thickness of at least 0.5 mm, otherwise the sheet may be deformed. The height of the corrugation is optimally 20 mm. Using a larger profile is impractical, it is inconvenient to use, has a smaller usable area and is more expensive, and a lower shoulder will not work either - it will not provide the required rigidity.

The type and thickness of the protective layer are important indicators of the durability of the material and the ability to withstand atmospheric conditions. The market offers corrugated sheets with various types of coatings, the most common of which are:

When choosing a coating, it is necessary to take into account the climatic features of the region: temperature range and air saturation with salt. Near sea coasts, only products coated with pural and PVDF are applicable. In mid-latitudes, polyester can be used. In the northern regions - frost-resistant plastisol.

DIY fence construction

Building a fence from corrugated sheets is a simple option, however, working with this material has some peculiarities. Failure to comply with installation standards will lead to rapid damage to the appearance and damage to the integrity of the fence. Therefore, first you need to develop a work plan and calculate the required amount of profiled sheets, supports and consumables.

Options for a fence made of corrugated sheets

The main types of fences that can be made from profiled steel sheets are sectional and continuous. For the first type, you will need to first prepare sections of brick or large-diameter steel pipes. The advantage of such a fence is that the entire width of the corrugated board is used, so the material consumption is less.

When constructing a continuous fence, the sheets will overlap, so when calculating the required quantity, you need to take into account only usable width.

The useful width of the sheet is always less than the actual width by two waves of corrugation, which will serve as connections in the construction of a solid fence.

The main stages of construction of these types of fencing are the same, so for DIY construction you can use the general scheme; the differences are only in calculating the number of sheets.

Material calculation

In addition to the corrugated sheet itself, construction will require many more materials; it is best to prepare them in advance in the required volume:

Supports (brick or wooden pillars, metal pipes or square pipes of at least 60 mm);
Transverse logs (tube square with a wall thickness of no more than 2 mm);
Self-tapping screws;
Exterior paint to match the color of corrugated sheets;
Cement mixture.

To calculate the amount of corrugated sheets, the fence perimeter and height are important. It is optimal to use sheets with a width of 1 to 1.5 meters for fencing; they are easy and quick to work with. To reduce material residues unsuitable for installation, it is best to choose sheets whose length is a multiple of the height of the fence.

Material calculation example

For a two-meter fence, the perimeter of which is 12 meters, you will need 6 sheets of corrugated sheets with a working width of 1 meter. This is 2 full six meter long whips of material. You can immediately purchase them in sliced form for ease of transportation.

The number of supports is also determined by the length of the fence. The racks must be stirred at least every 2.5 meters. Their length should take into account not only the visible part, but also the internal part, since the supports need to be deepened into the ground by 1/3. For a fence 2 meters high, posts with a length of at least 2.7 meters are required.

The length of the transverse logs should be equal to the distance between the pillars. The quantity depends on the height of the fence: at least 2 pieces, if the fence is about 2 meters - 3 pieces, then for every meter in height there is one additional crossbar.

Frame installation

For each rack you need to dig a hole, slightly deeper than the underground part of the support - this is necessary for arranging a gravel cushion. You can dig with a regular shovel or garden auger.

Align the supports in the hole and fill them with cement mortar. If the walls of the well are crumbling, you can strengthen them with a sheet of roofing felt. To protect the ground part of the racks from moisture, they must first be primed and painted.

It is necessary to install the transverse logs only after a few days, when the solution has completely dried. There are two ways to fix pipes on racks: welding– provides a strong and immovable connection, and bolts– they are easy to install, but over time the fastening may weaken. You can also decorate the fence with products made by cold forging.

Installation of sheets

To install corrugated sheeting, you can use special brackets that are installed on racks, or attach directly to joists, but the second method requires great physical effort and experience. The sheet is fixed using roofing screws, with a colored cap that matches the
the color of the fence, and the rubber gasket.

Sheets cut to size must be leveled vertically and secured with self-tapping screws along the edges and in the center on each of the joists. If the fence is solid, then each subsequent sheet of material is laid on the last wave of the previous one and fastened in the same way. At the end of the work, it is necessary to clean the area from unusable material residues, since the cut edges of the corrugated sheeting are very sharp.

The service life of a fence made of corrugated sheets depends not only on the quality of the latter, but also on the installation technology. Often the fence becomes distorted and becomes loose after just a couple of years; in order to avoid this and build it to last, you need to listen to the opinion of experts and not deviate from the norms and rules:

Cover the ends of the supports and sheets with decorative covers so that the metal does not come into contact with moisture;
Remove the top layer of soil under the fence and concrete a small strip on a slope for water drainage;
Paint with moisture-resistant paint all elements of the fence where there is metal without protective coatings;
Screw in self-tapping screws only between the waves of corrugated sheeting, and do not tighten them too much, as the protective coating may be damaged and signs of corrosion will appear in this place.

Step-by-step instructions for installing a fence made of corrugated sheets and some important features of the work that you should pay attention to are presented in the video.

Installation of fencing from profiled sheets is an affordable, practical and aesthetic option for improving the local area. Many works do not require special knowledge, so you can do them yourself, while additionally saving money on professional installation. If you have the skills to work with a welding machine and a gas drill, then installation “from” to “to” can be done independently.

Any man with minimal construction skills can build a fence made of corrugated sheets with his own hands. Such a structure is easy to build, it is durable, reliable, and perfectly hides your personal life from prying eyes. The material has many other advantages, the main one of which is that erecting a fence from it does not require the use of special equipment and a large number of assistants. Installation work is carried out according to the standard scheme, using conventional fasteners.

Corrugated sheeting for fence

A fence made from a profile sheet is a solid metal fence constructed from profiled sheets. It can be arranged in one part or along the entire perimeter of the site.

The strength and durability of this structure are in no way inferior to structures made of reinforced concrete or brick, but the profile has a much more affordable price. In addition, it completely protects personal property from intruders, animals, and strong winds.

The construction of such a fence takes little time and does not require much effort or construction skills. It is quite possible for every man to build it independently, without spending a lot of money on paying hired workers.

Advantages and disadvantages of such a fence

Not all people consider corrugated sheeting a suitable material for the construction of enclosing buildings, considering it unreliable. This opinion is erroneous, because raw materials have a number of undeniable advantages, which we will review below.

Advantages:

speed of construction of such a structure: there is no need to use special tools or hire people with special skills. The most labor-intensive operation will be welding, however, there are installation technologies without its use;
cost of consumables: does not differ in particular height, therefore this fencing option becomes accessible to most people;
continuous covering: completely hides the interior space of the site from prying eyes. The owner can independently adjust the height of the fence, because sheets can be ordered of absolutely any length;
the presence of a pronounced protective function: it is extremely difficult to climb over such a structure from above, the sharp edges simply cannot act as a reliable support for the hands;
durability (several decades), which occurs when all installation features are observed and high-quality material is used;
aesthetic appearance: the owner can choose any tone that matches the color scheme in which the house is decorated. Modern coating materials do not change their appearance under the influence of sunlight for a long time, pleasing the eyes of the owners with a well-groomed appearance;
ease of care: the material can be easily washed using traditional household chemicals by rinsing with water from a hose. The polymer structure of the raw material does not allow dirt to linger for a long time;
the ability to drown out extraneous sounds.

In addition to a large number of advantages, this type of construction is not without several disadvantages, which need to be familiarized with even before the construction of the structure.

Flaws:

high level of windage;
low resistance to moisture;
The load-bearing elements of such a fence may be prone to corrosion (joists, transverse pillars).

Choosing a profiled sheet for building a fence

2. Support posts (pillars)

To create a support, any type of material is used, from wood to stone, metal. The most suitable option is to use metal pipes.

The specific parameters of the racks will depend on the load that the structure is expected to receive. As a rule, pipes of sizes 60 or 40 mm by 40X2 mm are used. If round products are used, their diameter can vary from 60 to 100 mm. For any type of soil, purchased ready-made pipes or piles are suitable (when there is loam or other normal types of soil).

The finished posts have holes where corrugated sheeting is attached and a top cap, which prevents water from getting inside.

3. Transverse joists

Transverse logs are created using square pipes, dimensions 40x40(20)x2 mm. According to the recommendation of experts, the width of each element should be equal to half the width of the supporting column.

Wood products are not used because the wood will rot where it is attached to the sheets. This will reduce the service life of the entire structure, and will also prevent the profile from being reused. The metal corner is also not very convenient; if it is two millimeters thick, it will not provide the required level of resistance to wind load, and manufacturers do not recommend using thick versions for this purpose.

If a profile is too thick, then during drilling you will have to put in a lot of additional effort.

When the fence frame is assembled together without welding, special brackets are used, which are fixed with metal products.

5. Plugs for pillars (supports)

Plastic plugs are necessary to protect the poles from exposure to water. If it penetrates inside, corrosion processes will begin, which will reduce the service life of the structure.

The post is covered with a plastic fitting, which is inexpensive and allows you to completely solve the problem.

6. Hardware

When it is planned to create a weldless structure, hardware is used. These can be screws or bolts of sizes M6, 30 and 20 mm. The corrugated sheet can be fastened with rivets and self-tapping screws.

Professionals recommend purchasing self-tapping screws, because they are equipped with a special gasket made of neoprene rubber. It presses the canvas tightly without damaging its coating. The length of such screws can vary from 15 to 35 mm.

Important! If rivets are used, the edges should be treated with paint to prevent the formation of rust in these places, as well as the appearance of rusty stains on the surface of the sheet, which are almost impossible to get rid of.

The canvas has a universal coating. To mask possible scratches that invariably occur during installation work, paint cans are used. It does not require high consumption and easily copes with the tasks assigned to it.

The end strips, which play the role of decor, are U-shaped. They are placed along the upper edge of the sheet in order to prevent the appearance of cuts due to accidental touches there.

A fence around a country house and site is necessary not only to protect the property, but is also an excellent way to add attractiveness to your territory.

Corrugated sheeting is ideal for constructing a fence. This material has properties such as high strength, beautiful appearance, long service life, a huge selection of colors and low cost.

A fence made of corrugated sheets is easy to build by the owner himself. How to do this will be discussed in this article.

Before you begin the construction process, you need to prepare all the necessary material:

Support pillars. For these purposes, it is recommended to use a square metal profile measuring 60x60 mm. Round pipes are also suitable, but it is important that their wall thickness is at least 2 mm. Wooden supports are acceptable, but they are less reliable and require special processing.
Support pillars are placed at a distance of 2-3 meters from each other. Their height is calculated from the height of the corrugated sheeting plus one meter, which will be spent digging into the ground.
Crossbars. For crossbars, you can use a metal profile with a size of 40x20 mm, the required wall thickness is 2 mm. If the supports are made of wood, then the crossbars must be made of wood. The length of one crossbar is equal to the length of one span between the supports. They are docked in the center of the support.
If the crossbars are longer than the span, they will have to be trimmed. On the contrary, small crossbars will need to be joined in the middle of the span, which contributes to a significant weakening of the entire structure. If the fence is less than 2 meters high, then two crossbars must be installed. Otherwise, three are installed. But for an ordinary summer cottage it is still recommended to erect a fence about 1.8 meters high.
Corrugated sheet. There is a special type of corrugated sheeting that is made for the construction of fences. The thickness of the profiled galvanized sheet should be at least 0.5 mm, the wave height should be about 20 mm. Such characteristics guarantee the strength of the fence - gusts of wind will not bend the profiled sheet. Thinner material can also be installed, but in this case additional rigidity must be created through additional crossbars.
Holder plates. Necessary for assembling structures without welding. These plates are required to secure the crossbars to the support posts using bolts.
Pillar plugs. Required to protect support pillars from water entering them. The caps will also make the fence look more attractive.
End U-shaped strip. Installed as desired. It is intended for edging the upper edge of a fence made of corrugated board. It makes the fence look more complete. However, if you need to save money, you don’t have to purchase the bar.
Bolts. Necessary for attaching to crossbar supports.
Roofing screws. Required for fastening corrugated sheets. They are available in various colors, so they can be matched to the color of the corrugated sheet. The use of such self-tapping screws does not require drilling holes; they fit perfectly into the metal.
Cement, sand and crushed stone for concreting support pillars.

Corrugated fence - view from the yard

You can learn how to choose and use corrugated board for a tree-like fence in this article.

You can see photos of fences at the dacha made by yourself here.

How to install a gate with a wicket made of corrugated sheets with your own hands - read in this article.

Preparing tools and calculating the fence

When erecting a fence from corrugated sheets, you should prepare the following tools:

tape measure and level;
garden auger;
a hacksaw or jigsaw - for cutting corrugated sheets if necessary;
screwdriver for screwing in self-tapping screws.

Fence marking

Before starting work, you need to make the necessary measurements to calculate the length of the fence. Correct measurement is a guarantee of correct calculation of the required building materials.

It is necessary to drive pegs along the entire perimeter of the territory. If the fence has kinks, then the pegs must be installed at the turning point. Next, a nylon thread is pulled onto the pegs, at a height of approximately 20 cm from the ground. It is important that it does not sag. Then the total length of the thread is measured with a tape measure, which will be the same as the length of the future fence.

When calculating the material, it is necessary to take into account that the corrugated sheets are installed with an overlap on each other in one wave.

Carrying out installation work

First stage - installation of support pillars. First you need to install all the supports in the corners and in the places where the fence turns, then intermediate posts are placed. The frame of the future wicket and gate is done last.

The holes for the supports should have a depth of about 80 cm. The support must be driven another 20 cm into the ground. Therefore, the total depression is about one meter. The diameter of the hole is about 30 cm. To carry out this work, it is better to use a garden auger.

The supports are placed strictly vertically, using a level. Next, they need to be filled with concrete, the total hardening time of which is three days.

Installation of crossbars

The top crossbar is installed at a distance of 20-30 cm from the top edge. Bottom - 20-30 cm from the bottom edge of the fence. If there are three crossbars in the structure, then the third is attached in the center.

The crossbars are joined to each other on a support post or secured with bolts and special plates.

Fastening corrugated sheets

It is important to correctly install the first sheet of corrugated sheeting. The remaining sheets will be attached to its level. The material is screwed with four self-tapping screws to the crossbars at the point where the waves meet.

Self-tapping screws are screwed in through two waves. A sparser fastening will make the structure fragile, it will knock in strong winds. To ensure an even position of the screws, it is recommended to stretch a nylon cord as a level.

It is important to be careful at this stage. A big risk is damage to the polymer coating of the corrugated sheet. If this happens, the scratch must be painted over immediately to prevent the formation of corrosion.

Nuances with a fence height of more than 2 meters

If a fence is erected with a height of more than two meters, the following features must be taken into account:

for supports, a pipe with a cross section of 80x60 or 80x80 mm is used;
the corrugated sheet is attached to only three crossbars;
the depth of the pits for the supports is 1.5 meters;
The profile must be secured only with self-tapping screws.

Thus, building a fence from corrugated sheets yourself is not at all difficult. If a choice is made on this material, then the owner of a summer cottage will be able to evaluate the durability, reliability and aesthetic appearance of such a fence.

The video below shows how best to make a fence from corrugated sheets yourself:

In terms of reliability and durability, country fences made of corrugated sheets are superior to wooden ones, and in terms of aesthetics they are not inferior to more expensive fences.

Metal fences for a dacha made of corrugated sheets will not require any special knowledge to install, other than minimal skills in working with corrugated sheets and the availability of ordinary tools.

Types of fences

Corrugated fences for summer cottages are divided into types according to construction and design:

Solid - up to 3 m high;
Tall - from 3-6 m high;
Noise-proof.

Modern technologies for polymer coating of galvanized sheets allow you to choose any types of fences for your dacha made of corrugated sheets:

Under the tree;
Under the brick;
Under granite;
Under sandstone;
Under a wild stone.

Fences at the dacha made of corrugated sheets to imitate wood, having light or dark shades, imitate various species:

Pine;
Acacia;
Cedar;
Larch;
Aged tree.

The polymer coating of the profiled sheet can be:

One-sided;
Double-sided.

There are also many material options in terms of thickness and color, but more often the following types of corrugated sheets are used for garden fences:

To install a fence for a dacha made of corrugated sheets under a stone, to make it more similar to the natural material, you can use corrugated sheets with different “grout”: white, black, yellow, brown, etc.

Instructions on how to make a fence at the dacha from corrugated sheets:

To calculate the amount of corrugated sheeting, the perimeter of the fenced area is measured - the same amount of corrugated sheeting will be required, but taking into account its useful width, since the material is mounted overlapping.
To correctly calculate the required number of support posts, the perimeter of the fence is divided by the planned distance between the posts. The maximum distance between them is 2.5-3 m.
To calculate the logs (crossbars between posts), divide the perimeter by the length of the log and multiply by 2. Usually, for a fence on a summer cottage, corrugated sheets are attached to two logs. If it is intended to be attached to three logs, the resulting value is multiplied by 3. The number of rows of purlins depends on the height of the fence: to install a fence up to 2 m high, two rows of logs are enough; for a fence higher than 2 m, three rows are needed.

To build a fence at your dacha from corrugated sheets with your own hands, you will need a minimum of equipment and tools:

Level;
Drill and drills (or riveter for rivets);
Welding machine;
Container for cement mortar.

Materials:

Sheets of corrugated sheets;
Support pillars;
Lags;
Fence strips;
Crushed stone;
Cement;
Sand;
Primer;
Metal screws or rivets.

For support posts, profiled metal pipes are more often used, since they are strong enough to withstand the wind load on the fence, and they are cheaper than water pipes.

Choose pipes with a square cross-section of at least 50 x 50 mm or round with a cross-section of at least 76 mm. On round pipes, the top holes can be welded to prevent moisture from getting inside.

To install a corrugated fence in a country house, the best option is a 30 x 60 mm profile pipe with a wall thickness of 2 mm. With a fence height of 2m, the pipe is cut to a length of 3m. The surface is first cleaned, degreased and primed, and after installation, a sealed plastic plug is installed to prevent precipitation from getting inside the post.

The supports can also be made of asbestos-cement or wood. If wooden ones are used, they must be treated with an antiseptic, and the part that will be buried in the ground must be especially strong. For this purpose, it is treated with a blowtorch and bitumen primer.

For joists, a corrugated pipe 40 x 20 mm with a wall thickness of 1.5 mm is suitable. It is cut 3 m long. The surface is cleaned, degreased, and primed. Once installed, processing them will be more difficult.

When purchasing a profiled sheet, you should pay attention to the price. A low price may indicate that the material is too thin or the quality of the polymer layer is poor.

Self-tapping screws for metal are chosen to match the color of the profiled sheet 5.5 x 19 mm and do not require pre-drilling.

A fence strip is necessary to complete and shape the appearance of the fence. It is matched to the color of the corrugated board. There are more than 30 shades of profiled sheets, how to choose the right one is written here.

Marking the fence: to build a fence, mark a place for supports, gates, and wickets.
Dig holes for posts 1-1.5 m deep and 150 mm wide. To do this, you can use a hand drill. The depth depends on the height of the fence: the higher the fence, the greater the depth of the holes. The posts must be well reinforced to withstand the wind.
Profile pipes are installed in dug holes, which are covered with soil and crushed stone, followed by compaction or filling with concrete mixture. For greater aesthetics, metal pillars can be lined with brick. To install the posts, you need to use a plumb line so that they are installed strictly vertically. In order to secure the supports well, you can weld metal rods by burying them in the ground.
You can install the fence after the concrete pour has completely hardened. This is usually about three days. Then they proceed to installing the logs - they can be made of steel profile or other material. Electric welding for their fastening is the most reliable method of fixation. Another way is using bolted connections.
To attach profiled sheets to the logs, 35 mm metal screws are used, pitch 500 mm. The sheets are joined with an overlap. To avoid cuts and scratches, use gloves.

Installing a fence at the dacha from corrugated sheets depends on the type of soil: on soft soil, in order to avoid subsidence, it is better to build a strip foundation. A tape box approximately 20 cm high is made along the bottom of the pillars. To ensure its strength, the boards are fastened with bars or wire. A layer of waterproofing is laid along the walls, then concrete is poured into the box.

Anyone who made a fence at their dacha from corrugated sheets with their own hands was convinced that such a fence is practical and durable. Scratches on the corrugated sheets that appear later can be easily removed with spray paint.

The fence has a beautiful appearance, withstands temperature changes and difficult weather conditions well, and if you line the pillars with brick or stone, it looks simply amazing.

Fences made of corrugated sheets are used everywhere. This material is popular due to its ease and speed of installation, attractive appearance and affordability. If you agree with this statement and are planning to build such a fence for yourself, we suggest that you familiarize yourself with the step-by-step process of its construction.

Obtaining permission to manufacture and install fences from corrugated sheets

If the site where the fence will be erected is located in the city, you need to submit an application to the appropriate authorities asking for permission to carry out the work before installing a corrugated sheet fence. The application must be accompanied by drawings of the future fence and construction estimates, legally approved by the architectural and construction control authorities.

The received permit and design documentation should be registered with local authorities and only after that construction should begin.

If the fence will be erected on a site located in the suburbs, it is not necessary to obtain permission. You will only need documents confirming your rights to it.

Failure to comply with current legislation may result in a fine or demolition of the illegally erected fence at the expense of the owner of the site. Also, it will not be possible to sell such a house in the future.

Before erecting a fence, you need to decide which gate to build from corrugated sheets with your own hands. Gates can be swing, sliding, sliding. It is easier to build swing gates, but this type of gate requires extra space on the site to open it. To avoid any problems, you should choose the type of gate at the site planning stage. This article describes more about planning a suburban area.

Preparation for installation

Before construction begins, it is necessary to calculate the material taking into account the perimeter of the area to be fenced and the height of the fence. Remember the overlap. It is maintained within the range of 3 to 10 centimeters.

The boundaries of the location of the entrance gates and entrance gate are immediately marked, the installation pitch of vertical supports is calculated (usually 2.5-3 meters), the area is leveled and cleared of debris.

To mark the area you will need a tape measure, cord, and stakes. The latter are installed in the corners where the main pillars will be, and a cord is stretched between them. Then, with a certain step (2.5-3 meters), auxiliary pegs are driven in between the main pegs. They don’t forget about the future gate with a wicket; markings are also made for them.

Material purchase

To build a fence you need to buy:

Sheets of corrugated sheets. You need to know the dimensions of the profiled sheet for the fence. If the height of the fence does not exceed 2.5 meters, then sheets of grades C8-C21 are suitable. For fence heights over 2.5 meters, it is better to use sheets of grade C20 or C21. It is preferable to choose a polymer coating

Metal pillars of square or rectangular cross-section measuring 40×60 mm, or 60×60 mm, with a metal wall thickness of 1-2 millimeters. For gates and wickets, it is better to take 80x80 mm posts.
Horizontal beams (joists, cross members) on which corrugated sheeting is mounted. For them, pipes of the same sections are used as in the case of vertical supports, with a metal thickness of 2.5 mm. The dimensions of the beams are 20×40 or 20×20 millimeters. The distance between them is 1 meter 50 centimeters. Depending on the height of the fence, take one or another number of logs. Most often there are two of them
Roofing screws (galvanized) with rubber gasket, dimensions 5.5x20 mm. Up to 14 fasteners are required per linear meter of corrugated sheeting

How to build a fence from corrugated sheets

Pouring the foundation and installing support pillars

For fences made of corrugated sheets, two types of foundations are used: strip foundation, when a trench of a certain depth is dug along the perimeter of the marking (the depth of the strip foundation can be from 50 cm to 1.5 m) and filled with concrete, and local, when a separate hole is drilled for each post and also concreted. You can use a special drill for drilling. Installation of support pillars is carried out in the following order:

First, dig a hole 90 cm deep (clay soil) or 120 cm deep (loose soil). Its bottom is covered with roofing felt
Install the side posts and check their height by pulling a cord between them. If the level differs, additional sand is added to the hole or, conversely, a larger depression is made. To fix the supports in a strictly vertical position, wooden beams are used
They install intermediate posts, including those for gates with a wicket, and also level them in height
They pour broken bricks and stones into the hole near the pillars and compact them using a wooden beam. A layer of sand is poured on top and the resulting “pie” is filled with water to give it greater density.
Fill the hole with concrete until the end. It will take about two weeks to dry. The first watch periodically monitors the position of the pillars, aligning them if necessary
When the concrete has completely hardened, you can make brickwork near the vertical supports.

If you decide to make a local foundation for a fence from corrugated sheets, make recesses with a diameter of 25 centimeters and a depth greater than the freezing depth of the soil in your area.

Strip foundations are used in the construction of various types of houses. There are deep strip foundations and shallow ones. The first type of foundation is used for houses with a basement or houses over one floor, the second - for small outbuildings and one-story houses. You can build houses from calibrated timber on a strip foundation. Calibrated timber has good thermal insulation qualities and provides a microclimate that is comfortable for humans.

Country house frame-panel houses, houses using Canadian technology and many others can also be built on a shallow strip foundation. Read about country frame-panel houses in this article, and how to build a house using Canadian technology is written here. Both types of buildings are erected quickly.

Installation of cross pipes (logs)

When the concrete has hardened, the installation of transverse pipes begins. Their number depends on the height of the fence. The distance between the logs is maintained at one and a half meters. They are joined to vertical posts using a weld. If you have no experience in this matter, it is better to seek help from a specialist.

When all the jumpers are welded, they begin to paint the welded areas, thereby protecting the metal from corrosion. The top of the vertical supports is covered with plugs.

Installation of gates and wickets

Making gates and wickets is the most difficult process. First, frame structures with diagonal or horizontal connections are welded. The posts of the wicket and gate are connected to each other by a transverse joist to give the structure greater rigidity. Next, the assembled frames are attached to the posts and covered with sheets of corrugated sheets. You can immediately mount the corrugated sheet and then install the gate and wicket.

Fastening corrugated sheets to the frame

The corrugated sheeting is secured with special self-tapping screws and rubber gaskets. For one linear meter of corrugated sheeting, from 12 to 14 fasteners are used. Installation of corrugated sheets begins in the direction from the gate in both directions. The overlap of the sheets is one wave, the distance between the screws is 2 waves.

Cleaning the area

Installation is completed, you can start cleaning the area. The accumulated garbage must be collected and taken to where it belongs. You can remove the dust from the fence and begin to enjoy the new look of your site.

Video on how to make a fence from corrugated sheets with your own hands

Fence made of brick and corrugated sheets

Installation of fences from corrugated sheets

Fence at the dacha made of corrugated sheets from the inside