Kitchen made from PVC panels options. Kitchen decoration with plastic panels

What material is most often chosen for kitchen finishing? Are you thinking ceramic tiles? It turns out that for several years in a row plastic panels have held the palm. But it is losing its popularity.

This is due to the fact that PVC is a more affordable, practical and easy to install material. It will be a pleasure to do repairs with him. Let's look at the most important questions - what are the advantages of plastic panels and how to cover the walls with your own hands.

Why you should love plastic: 3 advantages

Let's start with the main thing - the advantages of PVC. And the first thing we note is the affordable price. When starting a renovation, you will choose a material that combines two main qualities - low price and practicality. Actually, plastic panels will delight you with their characteristics. In addition to cost, the material has the following advantages:

Not afraid of water, cleaning and high humidity. These factors are very important, since the kitchen is a place where work is constantly in full swing, and there’s no point in talking about humidity. Caring for PVC panels is very simple - wipe, wash them, and they will retain their beauty.
Does not conduct current. In the kitchen you will have all kinds of electrical appliances and there is a risk of short circuits. Plastic does not conduct electricity.
You can install the panels yourself. There is no need to attract specialists or spend additional funds. You can renovate the kitchen and cover the walls yourself.

Of course, something needs to be said about the appearance of the panels. Today you can choose models with a pattern, photo printing, glossy or matte finish. And for the apron area, you can choose panels with ornaments and abstract images. In the photo below, look at where PVC panels were used in both classic monochrome and color versions.

In the photo - the ceiling in the kitchen is made of PVC panels.

Let's say a few words about the shortcomings. The only thing the material is afraid of is high temperatures. If you choose skins for decorating a zone, pay attention to those models that can withstand temperatures of 170 degrees. While tiles can survive high temperatures, PVC, alas, is not such a resistant material. Also, do not use hard or metal brushes to clean the walls, so as not to damage the top layer.

Installing panels in 3 steps

Let's proceed to the main process - installing the panels on the walls. Repairs should begin with surface preparation. Regardless of whether you plan to cover all the walls or just the working part using skinals, you need to dismantle the old material. By the way, another feature of PVC panels is that if ceramic tiles require ideal evenness of the walls, then plastic can be installed on old wallpaper or plaster. Thanks to this “ability”, panels are most often chosen instead of tiles.

Step No. 1 - preparing the walls

So, the first thing you will do with your own hands is dismantling.

Remove all protruding elements from the walls - paintings and nails on which they hung, roof rails, lamps, etc.
If you had tiles or decorative kitchen panels installed on the wall, remove the old material.
Level the surface of the walls. There is no need to achieve perfect smoothness. Repair may be limited to “sealing” recesses, protrusions, and cracks. They need to be puttied and the surface allowed to dry.

You have completed the first stage - the walls are ready. For those who are making renovations for the first time, and finishing the kitchen seems complicated, a video from more experienced craftsmen will come to the rescue (at the end of the article). Below, watch the video instructions that will help you understand the process of puttying and removing old tiles.

Step No. 2 - install the frame

This stage will be the main one, since a correctly installed frame is the key to the strength of the wall cladding. The frame can be made of wooden slats - a more economical option, or metal - a more reliable and durable method. Both wooden and metal slats are attached according to the same principle, so it won’t be difficult to do it yourself. In addition to the slats, you will need:

roulette;
building level;
screwdriver;
drill;
knife for cutting plastic;
metal staples;
screws and dowels;
pencil.

Now let's move on to marking the walls. There is an important point here. The frame can be installed in two ways: horizontal and vertical. The first is used if the paneling will be done vertically, and the second - if horizontal. Both the installation of the skin and the covering of all walls can be carried out using the vertical method of fastening the frame. That's what we'll look at.

This is how the preparatory finishing of the walls is carried out. Although this stage is important, you can construct the frame with your own hands. If you are afraid of making a mistake and want the repair to be carried out to the highest quality, watch the videos of more experienced craftsmen. Photos of the frame installation process will also help explain all the points and details.

Step No. 3 – attach the panels

Now let's proceed to the final stage - we will attach the panels to the walls. Here, in addition to PVC panels, you will need additional components - profiles that will help install the sheets. There are several types of profiles:

L-shaped– will be needed at the start and finish of the cladding;
Profile F– will help cover corner joints. Also used for finishing and starting;
H-shaped– a universal profile, needed for panel joints.

You will also need a plinth, corner and outer profile. Do-it-yourself finishing will begin with the profile.

The first one you take is the L-shaped one. Attach it to the slats along the perimeter.
Next, you will need a corner profile (F-shaped) - install it at the “turns” of the wall.
Now take measurements between the guides (their outer side). Subtract 5 mm from the result.
Finishing begins from the corner of the kitchen. This way you will reduce material consumption. The panels are installed on wooden slats using a stapler. If you don't have a stapler at hand, you can use small nails or construction glue. PVC is mounted on metal slats using screws.
Insert each next panel into the groove of the previous one and thus move along the entire wall.
The very last sheet of plastic will have to be cut to width. To do this you will need a plastic cutting knife. The last panel is inserted first into the corner profile, and then into the groove of the previous sheet of plastic.

Here, in fact, the renovation is complete and the wall decoration is ready. Next, you can install the baseboards along the bottom line of the panels with your own hands. If you will only install them, it is best to fasten them with a stapler so that the nails do not spoil the appearance. Skinals can also be glued to the frame. True, such a solution is not durable. Over time, skins near the work area may become deformed. So that you don’t have any questions, watch the video where walls are decorated with sheets of plastic.

And one more piece of advice. If you have chosen wooden slats for the frame, treat them with a special antiseptic, and only then attach them to the wall. Now you know all the intricacies of installing panels and can safely abandon expensive tiles in favor of practical and versatile PVC.

What is it, aprons are in stock and on order, in various colors, these products can not only protect walls from contamination, but also update and decorate the room.

In production, high-quality modern material is used from food-grade plastic with a pattern applied using thermal and photo printing, with a highly varnished or matte surface with 3D drawing, applied in several layers and creating the effect of depth and volume.

The service life is about 5 years, which is important for using such an inexpensive and easy-to-install material.
Today, ABS plastic is very popular among materials used to decorate and protect the wall surface from mechanical damage, moisture, and household chemicals. Food grade ABS plastic is flexible, hygienic, and easy to use. ABS sheets are heat-resistant and can withstand temperatures from 40*C to 180*C. The temperature for applying a pattern on ABS plastic for its reliable and durable fixation is 180*C. Kitchen aprons made of ABS are practical and have an attractive appearance: they do not absorb grease, are easy to clean with a cloth and non-abrasive detergents, with proper care they retain the visual effect of glass for a long time, and have a very clear and high-quality pattern.
When installing it, a specialist only needs to be careful and have basic skills. Aprons are easy to transport, install, do not break, easily return to their original shape after rolling into a roll, do not crack when screws are screwed in, and are easily cut with a construction knife. To cut, simply apply marks and draw a straight line with a sharp blade along the surface of the apron, then break it at the notch. It is necessary to glue it to the wall surface with a special glue for plastics and wall panels.

ABS plastic is better than regular plastic;
Support local producers.

If you need a large number of aprons you can request wholesale price via the feedback form.

Easy transportation: rolled into a roll 60cm high, 25-30cm in diameter. The compact and lightweight roll can be transported on the subway or take up minimal space in the car. After unpacking, it easily returns to its original shape.
Attractive price.
Density of ABS apron allows you to cover all the unevenness and defects of the surface on which it is mounted. In the product card you will find photographs of interiors using ABS aprons.
Savings on Transport Company services: minimal volume, light weight and simplicity of packaging allows you to spend approximately 500.00 rubles on transportation to distant regions.
Easy installation: no special knowledge required, installed using liquid polystyrene nails or self-tapping screws. Easily cut with a construction knife or disk.
100% moisture resistance, heat resistance up to 180 degrees C, brightness and quality of thermal printing, varnished or matte 3D surface, resistance to mechanical damage.
Easy to clean from dirt and greasy marks, does not absorb grease, and does not fade over time. To preserve the durability of the varnished coating, cleaning with liquid, non-abrasive detergents is recommended.
Set: Additionally, at the customer's request, the apron is equipped with 3mm thick PVC strips: initial, connecting, internal and external corners. Initially, such strips are intended for the installation of HDF aprons, but when using silicone sealant, they are perfectly installed and complement thinner ABS materials.
Delivery: We deliver throughout the Moscow region and regions. The cost of delivery in Moscow is 800.00 rubles.

Previously, only tiles served to protect the kitchen walls from household pollution, but today you can create an apron with your own hands that is in harmony with the interior of the room. The first task is to decide on the choice of material.

Types of aprons for the kitchen

The most common material options for a kitchen apron include:

Plastic. Installation of this structure is simple, maintenance will also not cause difficulties, and the costs are very affordable.
MDF. A good choice, inexpensive material, resistant to fungus and mold.
Glass. More expensive option, new in the kitchen interior. You will have to wash it often, and the fragility of the glass will not protect against strong impacts. A more practical option is tempered glass, but its price is much higher.
Tile. Inexpensive, unmarked, simple. For conservatives, renovation is an excellent option.

And yet, the first option is chosen more often, besides, plastic also implies the use of PVC panels, sheet plastic and carbonate glass (also a type of plastic). The material is suitable for any style of room, minimal maintenance is required, and in terms of its aesthetic qualities, plastic is not inferior to more expensive structures.

Plastic apron

The plastic apron is remarkable in that it has a fairly high heat resistance, it is in close contact with the kitchen wall, does not accumulate dirt and dust, and is strong in simulating almost any texture.

To install plastic panels (sheets) with your own hands, you need:

Determine the dimensions of the apron. The height of the table is the basis for calculating the distance from the floor to the base. The apron should be at least 1-2 cm below the table surface.
The height of the apron ends where the wall cabinets begin. It may not reach them a little.
Section of plastic panels. The best way to do this is with a hand saw with a fine-toothed file inserted.
There are different ways to fix plastic on the wall. A quick way is to glue the material, but tearing off its walls with your own hands will then be very difficult. You can also screw plastic onto screws, but it is best to install the screws on a base of metal profiles attached to the wall. It turns out that the apron is removable.

All is ready!

Fastening for plastic panels (video)

Apron made of PVC panels

The installation of this design is practically no different from the previous version. The main thing is that the kitchen walls are smooth. In this case, installation will be as simple as possible.

If the walls are not perfectly even, then you need to prime the surface, seal all the cracks, cover with plaster and re-prime. Then the apron needs to be glued. PVC panels are fixed like this::

Assembly adhesive is applied to the inside of the protective layer. The glue is spread on the entire surface of the plastic and on the area of the kitchen where it will be fixed.
The distance between the adhesive strips is about 15 cm. Once the glue is applied, the plastic is applied to the wall; it can be fixed using spacers.
Additional fixation. The panels can also be attached to the corners with self-tapping screws.

Obviously, it’s not difficult to handle the installation of plastic with your own hands.

Finishing a kitchen apron with PVC panels (video)

Helpful hints

Plastic sheets are cheap, and an economical option for kitchen renovation involves using just such a design. Some knowledge about the characteristics of plastic will be useful:

Plastic is not afraid of high temperatures, with the exception, of course, of direct exposure to fire.
The surface of the panels is smooth, so dirt will not get clogged into tightly fitting joints.
Plastic is not afraid of moisture, so the processes of rotting of the material are excluded.
But you can’t clean plastic with abrasive products, they are dangerous for it.
You can wash the plastic with a damp soft cloth or sponge. The detergent should not be harsh, otherwise the surface will be scratched and the design will not be preserved.

It is easy to pierce the plastic with something sharp, piercing or cutting. Therefore, you should not allow children, for example, to try to pierce the material with something.
The choice of colors and patterns of panels is incredibly large: both monochromatic, and extravagant, and imitating natural patterns.

If at some point some panels become boring, replacing them with more modern ones will be affordable.

Modern ideas for finishing an apron in the kitchen (video)

Kitchen wall panels are a great way to radically change the design of your backsplash.

Wall panels for the kitchen look beautiful, they are practical and reliable.

Features of kitchen panels

The most important advantage of this type of finishing materials is that with their help you can change the interior so much that it will be simply unrecognizable. Such panels can be chosen for absolutely any style of kitchen design. The market for these products offers a variety of color variations. When choosing a material, you can look through photos of kitchen panels and choose exactly what you like and will suit the design of your kitchen area.

The panels are installed quite easily. Therefore, almost anyone can carry out interior design work, even if he is not a professional builder.

Almost all wall panel options on the market have specific benefits that suit the kitchen environment. In addition, such material is very easy to care for, and if necessary, it can be very easily replaced.

Video: how to choose wall panels, advice from experienced craftsmen!

Of course, each type of panel has its own characteristics (regarding appearance, installation and ease of maintenance).

Which wall panels for the kitchen should I choose?

Due to the wide and varied range, panels can be chosen not only in different colors and designs. And also in order to divide the room into separate zones, place certain accents in the interior, create additional decor for the room or make the basic decoration of both the walls and the kitchen apron.

In any case, from the huge variety, everyone can choose exactly what they need!

PVC panels for kitchen

PVC wall panels for the kitchen are a fairly economical option and, moreover, very common. Plastic panels for the kitchen are absolutely practical, which is not at all difficult to explain, because they:

Absolutely resistant to moisture
Able to withstand different temperatures
If necessary, they are easily replaceable (and are very inexpensive)
They are easy to care for

Such materials are easily mounted on the wall, thanks to a wooden frame and the most common fasteners. Everything is done in a certain sequence, using such improvised means as: a hacksaw, a construction knife, pliers, a blade, a screwdriver, dowels and self-tapping screws.

As a result, when purchasing wall panels, there is no need to spend additional money on installation work or any special types of fasteners. And all thanks to the fact that you can buy everything necessary for fastening in the same place where the panels themselves are, and you can install them yourself.

MDF panels for kitchen

This material is almost the same as PVC.

The difference lies in the fact that MDF does not tolerate moisture at all, because to some extent it is the same paper. And if such panels are used incorrectly or carelessly in practice, they will quickly become completely unusable: they will swell and spoil the overall appearance of the kitchen interior.

Accordingly, MDF panels for the kitchen must initially be selected with a special protective coating and “behave carefully” in the kitchen. Or you can place such finishing in a zonal way, or maybe even in the dining room area, so that it is located as far as possible from the stove and sink.

Video: installing a kitchen apron made of MDF

The design of such materials is quite diverse. Using it, you can more economically replace marble materials, as well as expensive stone or wood.

Sheet panels

These are PVC and MDF panels, which are produced in long narrow sheets. They can be cut quite easily into the desired shape and size. All characteristics are exactly the same as those of MDF and plastic panels for the kitchen.

Therefore, when you choose sheet panels, be sure to discuss with the seller the material from which they are made.

Glass panels for kitchen

Such materials are gorgeous. They are the most popular, but they also cost the most. Glass panels for the kitchen are also used to decorate the work area or apron. Glass is completely resistant to any reaction to elevated temperatures and the ingress of moisture or liquid.

And if the glass surface gets dirty, this is not a problem at all, because it is very easy to clean. Thanks to all these advantages, glass panels are of interest to most people who are updating their kitchen design.

Based on this, this type of panel is also valued financially. But if you have the means, you will never regret making your wall panels out of glass!

Laminated wall panel option

This is also an excellent option for finishing work in kitchen areas, but it should not be close to the stove or sink. Ideally, this type of panel will fit into the area where food is eaten.

What to look for when choosing wall panels?

There are a number of nuances that are worth paying attention to, namely:

Moisture resistance of the material
Withstand temperature changes
Easy cleaning. He should not be afraid of fat and liquids.
Ability to respond to mechanical stress
Beautiful appearance and, at the same time, durable material
Easy to install or dismantle.

Video: glass kitchen apron

Installation of panels in the kitchen

If we are talking about plastic, laminated or MDF panels, their installation is absolutely simple. It is necessary to attach the wooden frame using a level and tape measure, as well as make precise markings and calculate the correct measurements for both the panels for the kitchen apron and for all other areas.

Video: Overview of kitchen installation, with installation of panels

The time you will have to spend on installing the panels yourself is about one hour per square meter. In the case of installing glass trim, it is better to entrust it to professional craftsmen, since without the necessary skills and experience it will be quite difficult to install them.

Traditionally, the kitchen apron and walls are covered with ceramic tiles, but plastic panels can do a lot against this material - both in terms of design and practicality. To understand why this is so, consider the classification of material.

What types of plastic panels are there for the kitchen?

Plastic kitchen panels are made from extruded polyvinyl chloride (PVC). They are classified into types according to dimensions:

PVC lining: 10-12.5 cm wide, up to 3 m long, usually monochrome in color;

Actually wall plastic panels: width 15-50 cm (25 cm are more common), length up to 3 meters, seamless connection;

PVC sheet: width 0.8-2.03 meters, length 1.5-4.05 meters, thickness from 1 to 30 mm; with a flat, smooth surface, matte or glossy.

Advantages of plastic panels

Kitchen walls and apron lined with plastic panels have the following advantages:

Lightweight design, which makes fixing PVC incredibly simple;
Speed of fastening work – kitchen panels made of plastic are fastened 10 times faster than ceramic tiles;
The apron and walls made of plastic are incredibly easy to clean - they can be wiped with napkins or washed with standard detergents (non-abrasive);
Plastic panels for the kitchen are made of hard PVC, resistant to high temperatures (sensitivity threshold - 120°);
Modern plastic finishing allows you to create a kitchen backsplash with any design - with unusual prints, three-dimensional patterns or original colors; transparent wall panels are often used;
And the main advantage is that the walls and apron are covered with plastic - it is budget-friendly and affordable.

Cons of plastic trim

Of course, plastic wall panels have their drawbacks - in most cases they are a counterbalance to the affordable cost. The main negative characteristics of plastic include:

Small margin of safety, low wear resistance;
Possibility of damage to the front decorative panel due to prolonged contact with detergents or ultraviolet rays;
Flammability upon contact with open fire - this should be taken into account when arranging the kitchen apron.

There is one more nuance - PVC wall panels for the kitchen must have all certificates, including hygienic ones, confirming that the material is made from safe raw materials that do not emit harmful substances when heated.

Do not think that finishing a kitchen with PVC panels is impractical or unprofitable. The main thing is to choose the right material.

When choosing kitchen wall panels, you need to follow these recommendations:

The dimensions of the plastic sheet or panel should be larger than the apron area so that the material extends behind the cabinets and is slightly below the working surface.
If you plan to place plastic close to the hob, then do not forget to make sure that the material has fire safety certificates.
The color scheme is selected depending on the features of the kitchen: large patterns and dark colors are preferable in spacious rooms, and in small rooms wall panels with small floral patterns or calm light colors will be more appropriate. A win-win option is light, plain or wood-imitating panels without gloss.

You can choose wall panels of unique design textures: metallized for, brick for, wood for, imitation of old images or ornaments for vintage.

With the help of plastic panels in the apron and on the walls, you can even visually expand the kitchen space if they are installed horizontally, and “raise” the ceiling when installed vertically.

Advice! The plastic apron should be supplemented with a border that protects the joints of the panels from moisture and dirt.

Also see our other materials:

We fasten the wall panels with our own hands

To attach the panels to the apron or to the walls you will need the following tools:

Hammer drill and screwdriver;
Pencil, tape measure;
Plumb or level;
Construction stapler, staples for it;
Glue;
Metal profile or wooden beams to create sheathing;
Suspensions;
Dowels, self-tapping screws;
Actually PVC panels of the selected type and size.

Method 1. Plastic panels can be glued directly to the wall. This is an easy method to implement, but it will not be possible to dismantle the material without damaging it if necessary. In addition, gluing is possible only if the kitchen walls are smooth and their difference is no more than 1 centimeter. Additionally, the panels should be fixed in the corners with self-tapping screws.

Method 2. You can screw the material directly to the wall - for this, mounting holes are drilled, the panel is secured, and the places where the screw heads are located are masked with plugs. For this method of fastening, you will need to first prepare the wall: repair cracks and potholes, level it, prime it.

Method 3. Plastic can also be installed on the sheathing - first, the panels are screwed (attached) to a profile or strip, and then attached to the wall.

Method 4. Installation of plastic panels using metal profiles and brackets is carried out using a similar technology using lathing.

Polyvinyl chloride is a universal plastic material, the hygienic and mechanical characteristics of which fully allow its use in the renovation of residential premises. Plastic panels for the kitchen are rich in variety, thanks to the lamination of the outer PVC surface of the panel. A variety of fashionable lamination textures are complemented by textured photographs, the prints of which imitate anything: from annual wood rings to luxurious Venetian plaster. It’s especially nice that some kitchen panels have a texture similar to what the wall mosaic looks like in the photo. This solution looks excellent in quality.

Types of Plastic Wall Panels

To quickly update and decorate your kitchen walls, there are three types of PVC panels:

Slatted narrow typesetting panels.

Their width ranges from 25 to 50 cm. And the standard length - wall - is from 2.6 to 3 meters. The usual lining is most associated with these panels. The similarity with plastic sheathing is also in the installation method. Ideally, the slatted panels will be mounted on a wooden or aluminum sheathing. If the kitchen area urgently requires saving space, then the material can only be glued onto pre-aligned walls. Moldings are provided for all joints in the corners.

PVC Square Tiles.

Its dimensions can range from 30x30cm to 98x98cm. Tile panels can be used to lay out an aesthetic motif or pattern. They are also attached to a crate made of wooden slats. The slabs are assembled together using the tongue-and-groove method. The thickness of panels and slabs ranges from 8 to 25 m.

Sheet wall panel for kitchen.

This is a monolithic dense sheet of considerable size: on average 1.22 x 2.44 m. It can also have a fashionable print imitating photographs. The thickness of the sheet is much smaller than that of the panel - only 3-6 mm. There are no special fittings for the joints, so the seams between the sheets are filled with sealant or masked with a slatted profile.

Video about what wall panels are:

Reaction of plastic panels to temperature conditions

This may surprise you, but the expansion of the PVC material when the temperature rises by 40°C leads to an extension of the three-meter panel by 1 cm. This should be taken into account if repairs are made in the cold season. If you are dealing with plastic sheet materials in winter, then trim their edges so that there is a 5 mm gap at the top and bottom in the grooves of the guide profile. This will protect the material from deformation during temperature changes, which are constant in the kitchen. There is advice from experienced people, suitable for any wall materials, if the renovation is started in winter - let the PVC rest in the warmth of the apartment for a couple of days - it will heat up and acquire the properties of normal expansion. The same applies to the situation if the kitchen wall panel is installed in the heat. When warm, the material expands and the wall sheets seem to fit perfectly into the grooves. But with the onset of cold weather, cracks at the joints of PVC panels will suddenly become noticeable. In principle, it’s okay, because next summer everything will return to normal again. But it is worth remembering that it is better to carry out such renovations in the kitchen in the off-season.

Rules for installing plastic wall panels for the kitchen

The installation of any wall material consists of a string of important processes that should be responsibly resolved at each stage:

Choosing a model and color of plastic wall panels for the kitchen

For the kitchen, an idea may be useful when the lower part of the wall is sheathed horizontally with panels of a darker color, and the light upper part is sheathed vertically.

Calculation of the volume of PVC wall panels for purchase

You need to calculate the number of panels based on the square footage of the kitchen walls being sheathed, adding the trim of each panel along the length. That is, you need to count how many panels will fit in the kitchen along the width of each wall, and multiply the number by the length of the panel offered in the store. Multiply the resulting number by the width of the panel in meters.

Calculation of moldings for joining PVC panels

There are various joining profiles for wall sheets. Some help bring the sheathing together in the corners, others help join the cut ends of the slats. Still others snap into the grooves between the ceiling and wall panels, acting as baguettes.

Installation of lathing for installation of kitchen wall panels

The easiest and cheapest way to make lathing is from wooden slats with a cross-section of 25x40mm. This is an excellent material for the kitchen.

Attention! The wood must be well and properly dried.

The uppermost and lowermost profile of the slats is installed clearly horizontally (track with a building level). Then - all intermediate ones with an interval of 60 cm.

Screw the sheathing to the kitchen walls with self-tapping screws with a hidden head. If the wall has a tolerable curvature, then horizontal sheathing is quite sufficient.

Covering the kitchen with plastic wall panels

Installation of panels begins from the corner.
The first of them is installed strictly at a vertical level and secured with the staples of a construction stapler.
When the plastic strip has taken its place, it is fixed with small self-tapping screws, one to each wooden block. All the following trim elements will automatically fit as needed. However, special brackets for fastening plastic wall panels are sold. They are very convenient to work with and are reliable in operation.

If you will be finishing the floor with tiles, then here is a link where to buy floor tiles for the kitchen in Moscow

It's no secret that the walls and ceilings in our apartments have numerous irregularities. During renovation, these problems can be easily and quickly eliminated using PVC panels. In addition, a wide selection of color palettes, textures, prints, a variety of types and sizes of panels allow you not to restrain yourself when choosing a style and implementing design ideas. Maintaining order in such a kitchen will not be a hassle.

Leveling the surface of walls and ceilings has two solutions: using plaster and sheathing. Experts recommend using the first method when the curvature is no more than 30-50 mm, otherwise repairs will require large investments in material and work. And with the help of cladding, with a small budget, you can hide any flaws.

Versatility, ease and speed of installation, long service life, and affordable prices have firmly strengthened the position of PVC panels among the leaders in sales.

NATURAL CHEMISTRY

Polyvinyl chloride (PVC) is a thermoplastic polymer (plastic). It is obtained from natural components: 57% rock salt and 43% petroleum products. Panels are produced by creating a mixture of polyvinyl chloride with plasticizers, stabilizers, and pigments that improve the quality and properties of the product: plasticity, elasticity, increase light resistance and thermal stability. The number of auxiliary components from all manufacturers, as a rule, is more than 200, but everyone has their own recipe for making it.

Kinds

Slatted panels- narrow type-setting, usually monochromatic planks, like classic lining. Length ranges from 2400 to 3700 mm, width from 250 to 500 mm. Thickness varies from 5 to 25 mm.

Tile panels- square plastic tiles. The dimensions of one cell range from 300x300 to 980x980 mm. Thickness – up to 250 mm. One of the advantages is creating combinations of different colors and structures, creating mosaic canvases.

Sheet panels– wide sheets, much thinner than slatted ones – only 3-6 mm. Standard size - 1220 x 2440 mm.

Multilayer panels(sandwich) - almost full-fledged walls, ceilings or partitions, in demand for country houses. They are sheet panels, between which there is polyurethane insulation, sound insulation and other materials. Standard – 1220x2440x7 mm.

The width of the panel is always indicated without taking into account the ridges, grooves and other joining elements. Therefore, when determining the amount of material required, only the dimensions of the front surface are taken into account.

Peculiarities

PVC products differ from each other not only in shape and size, but also in the way the top decorative layer is processed: using thermal film, offset printing and lamination.

Thermal film applied by rolling onto the front part using a special roller. The color palette is very wide, photo printing is possible. Well suited for imitating stone or brick. In terms of brightness and variety of textures and patterns, it exceeds the capabilities of the tile assortment. Most often, the film is used for sheet panels and PVC tiles. Sensitive to harsh detergents.

Offset printing involves applying a design directly to the panel, as in a printing house, and fixing it with varnish. Typically used for mosaic images, floral patterns, and bright prints. The surface can be either glossy or matte. However, this technology does not provide sufficient coating strength and is highly sensitive to mechanical damage, and therefore direct printing is more often recommended for decorating the dining area.

Lamination provides the maximum strength that PVC is capable of, because, in essence, another layer of plastic is added. According to reviews on the forums, such wall panels last much longer and can be cleaned with any chemical means. All this provides them with a leading position when decorating the apron area. Lamination also gives an advantage in the choice of images, provides for the execution of drawings and photos to order, that is, it ensures the exclusivity of the kitchen interior.

The most expensive are sheet models with lamination, price tags are quite comparable to tiled competitors, with 3D photos or drawings, friezes, as well as all textured and volumetric options. The economy class includes panels with direct printing, thermal film and, of course, the simplest ones - without a pattern.

In the premium goods segment, Kadillak Plastic presents a mirror version of the PVC family, made of acrylic and glass, while being much lighter and stronger than the latter. The sheets bend easily and can be used to wrap columns if desired. The panels are not afraid of temperature changes and can withstand temperatures from – 500 to + 500°C. The assortment includes tinted and holographic (shimmering) models.

STYLE BASICS

Mistakes made during a kitchen renovation can result in a new remodel. To prevent the replacement of incorrectly selected materials, it is necessary to think through the design of the entire room at the planning stage, decide on the main and finishing materials, make sure of their compatibility, and study the operational features.

Polyvinyl chloride gravitates towards modern and trendy solutions, supports them with numerous bright types of films and patterns, and organically disguises technical equipment, for example, recessed spotlights. For small rooms, experts recommend using glossy materials. Glitter and a slight mirror effect visually expand the space.

No matter how bold the idea, experts advise not to use more than three colors in one project.

Metal spraying and photo printing adequately support the asymmetry of modernity and the brutality of high-tech. Minimalism is an ideal pairing with sheet plastic. And the cheapest single-color slats seem to be created for Provence. They are chosen in light pastel colors, with a matte, sometimes textured front part. For a classic Mediterranean style, you will need imitation stone, an emphasis on white and blue-blue. Textured wood-look film - country finishing. Plastic panels, mosaics, laminated photos give great scope for eclectic ideas.

AWAY FROM LIGHT AND HEAT

No matter what tricks and tricks manufacturers resort to, PVC does not tolerate direct sunlight. Prolonged exposure to ultraviolet radiation leads to photodestruction, as a result of which the plastic loses its elasticity and strength. To counteract these processes, many factories add light-absorbing dyes to the panels. In this way, it is possible to prevent the destruction of the material over almost the entire thickness, but it does not prevent fading or changes in the protective properties of the thin outer layer of the plate.

Modern technologies make it possible to produce polymer materials that can withstand temperature loads of at least 120°C. According to the fire classification, with the exception of Chinese production, PVC is classified as self-extinguishing. However, sensitivity to high and low degrees is their weak point. For example, at + 40°C, a three-meter panel lengthens by 1 cm from the standard length, which is determined by the positive mode within the range from 17°C to 25°C.

Thermal dependence should be taken into account during installation and operation. Polyvinyl chloride must be protected from a gas or electric stove; it is not recommended to install PVC in close proximity to radiators.

If repair work is carried out during the cold or hot season, experts recommend allowing the panels to rest for a couple of days so that they can acquire sizes appropriate to the conditions of their future use.

Closely fitted in the heat, during cold weather cracks may appear at the joints, so the off-season is considered ideal for wall cladding.

WITHOUT MUCH HASS

The easiest way to install PVC panels is with glue or liquid nails. Suitable for tile and sheet panels. With a material thickness of up to 0.4 mm, walls with small defects do not need to be leveled; if more than 0.5 mm, it is no longer possible to do without plastering work to correct the complex relief. The thinner the plates, the better their adherence to the surface.

Before applying the glue, remove dust and apply a primer. The tiles are joined together into grooves that do not require masking, and the narrow gap at the point of contact of the sheet plates is filled with sealant and covered with a slatted profile.

There are various profiles and moldings for joining work. You can’t do without some when bringing together the corner trim, while others hide the ends and trimmed parts of the trim. Ceiling plinths or baguettes are provided, which snap into the grooves between the ceiling and wall panels.

The modern consumer has a huge variety of finishing materials at his disposal. Each of them has its own characteristics that are definitely worth knowing. This article will discuss in detail the finishing of the kitchen with wall panels.

A little theory

What is this material

Finishing panels for the kitchen are strips about 3 meters long and 10 to 25 cm wide (depending on the specific batch). They are mounted on a special frame (wooden or metal). Profiles are used at joints and corners:

F-shaped - for finishing, starting and overlapping corner joints.
L-shaped – for finish and start.
H-shaped - for finishing joints.
External, corner and skirting profile.

Advantages and disadvantages

Now, according to all the canons of the genre, it is necessary to understand what are the advantages and disadvantages of finishing the walls in the kitchen with 12x244 wall panels (or others). So, let's start with the positive qualities:

Waterproof. This factor is very important, because the kitchen is a place with high humidity. They are not afraid even of direct contact with water.
Simple and convenient installation. Installing them is as simple as possible, so most people prefer to do it themselves, that is, without the help of specialists.
They do not conduct electric current. Do not forget that there are many electrical appliances in the kitchen and there is always a risk of a short circuit.
Low cost. Undoubtedly, in the modern world, price is one of the key criteria by which consumers choose certain products.

Even the sweetest barrel of honey is not immune to a fly in the ointment:

Subject to mechanical damage. In the event of physical impact, this material is quite easily damaged. In this regard, it requires the most careful operation.
Fire hazard. As the instructions say, wall panels are not able to withstand high temperatures. Therefore, in places close to sources of fire (for example, a stove), additional protection should be taken.

Installation

Having familiarized yourself with the main features of the material, you can proceed directly to installation. As in any other construction operation, all work should be divided into several stages.

Surface preparation

Finishing a kitchen with PVC panels does not require careful surface preparation. However, some manipulations will still have to be done:

The first step is to remove all protruding elements from the walls (pots, paintings, lamps, etc.).
If the previous covering was tiles or wall panels, they need to be dismantled. If before this there was wallpaper or decorative plaster on the walls, you can leave everything as is.
Next, you need to evaluate the evenness of the surface. Noticeable defects (protrusions, pits, etc.) should not be allowed. If there are any, they need to be puttied.

Frame

Advice: if wooden slats are chosen, they must be treated with an antiseptic before use. This measure will prevent the wood from rotting.

The frame is usually made of wooden or metal slats (the first option is more affordable, and the second, in turn, is more durable). There are two methods of attaching the frame: vertical and horizontal. The first is used if the panels for finishing the kitchen are installed horizontally, and the second is the opposite.

In order to avoid confusion, in this article we will consider the vertical installation of guides. So, the work needs to be carried out in the following sequence:

On the walls, at a distance of 50-60 cm from each other, you need to draw horizontal lines. To do this, you can use a plumb line or level.
Next, metal brackets are screwed along this line (they are purchased in accordance with the slats). They should be placed in increments of 50-70 cm. They are fixed using screws and plastic dowels.
Without fail, the staples must be at the very bottom and top of the walls. At the end they are bent in the shape of the letter “P”.

Wooden (or metal) slats measuring 20x50 mm are inserted into the center of the bracket and secured with 25 mm self-tapping screws.
Next, the slats are attached strictly according to the level, maintaining the plane.

If any points remain unclear, you can watch the training videos that are presented on our portal.

Sheathing

Having ensured the strength of the frame, you can proceed directly to its cladding. This should be done as follows:

An L-profile needs to be installed along the perimeter to the slats.
At the corners of the wall, an internal or corner profile should be fixed.
Next, you need to measure the distance between the outer sides of the guides and subtract 5 mm from it.
Finishing the kitchen with panels should start from some corner. This will reduce material costs when cutting. If wooden slats were chosen, then fastening is done using a construction stapler; if metal slats, then using metal screws.

Tip: if you don’t have a stapler at hand, you can nail the panels onto small nails.

Each subsequent panel must be inserted into the grooves of the previous one. Thanks to a well-thought-out design, this procedure can be done even by inexperienced craftsmen.

The most difficult procedure is inserting the last panel, because most likely it will have to be cut to width. To do this, you can use a small hacksaw. You must first insert the last panel into the profile, and then into the grooves of the penultimate one (read others).

Conclusion

This article discussed in detail how to decorate a kitchen with plastic panels. If you followed all the recommendations presented above, you will probably have an attractive kitchen.

Emmett Brown

The kitchen should be conducive to eating and pleasant evening conversations, so you want this room to be cozy and comfortable. Undertaking expensive and lengthy repairs is not always advisable, and sometimes quite expensive. In this case, plastic panels for wall decoration will come to the rescue; even a non-professional can master the work with them.
Plastic panels have a number of advantages. They are waterproof, have good sound insulation, do not emit toxic substances into the air, are easy to maintain, and are also designed taking into account fire safety requirements. Such panels are not flammable. The disadvantages include the relatively easy damage of the panels and the fading of bright colors in the sun.

Needed for work

To work you will need the following tools:

Finishing with plastic panels

Installation can be carried out using frame or frameless methods. The first is acceptable if the surface of the wall is perfectly flat; for this, it is carefully puttied and primed. The second method is used more often, so let’s consider it in more detail.

The frame is constructed using wooden, plastic or metal slats. The slats are secured strictly perpendicular to the floor and each other using dowels. You'll need a level here. The minimum distance between frame slats is 50cm. At this stage, the fittings are installed. Then the panel is cut to the desired size. The first panel begins to be mounted from the corner; self-tapping screws or staples are used for fixation. Particular attention is paid to the quality of fastening of the first panel, since all subsequent panels will be aligned with it; these panels are inserted into the grooves.

Using plastic panels, you can make a beautiful apron for your kitchen set by choosing the appropriate style. But you should avoid the area above the hob. Pipes and risers can be hidden by taking care of a special door.

Kitchen finishing with plastic panels
Decorating the kitchen with plastic panels Posted by Emmett Brown The kitchen should be conducive to eating and pleasant evening conversations, so you want this room to be cozy and

What types of plastic panels are there for the kitchen?

Plastic kitchen panels are made from extruded polyvinyl chloride (PVC). They are classified into types according to dimensions:

PVC lining: 10-12.5 cm wide, up to 3 m long, usually monochrome painted,

The actual wall plastic panels: width 15-50 cm (25 cm are more common), length up to 3 meters, seamless connection,

PVC sheet: 0.8-2.03 meters wide, 1.5-4.05 meters long, thickness from 1 to 30 mm, with a flat, smooth surface, matte or glossy.

Advantages of plastic panels

Kitchen walls and apron lined with plastic panels have the following advantages:

Lightweight design, which makes fixing PVC incredibly simple,
Speed of fastening work - kitchen panels made of plastic are fastened 10 times faster than ceramic tiles,
The apron and walls made of plastic are incredibly easy to clean - they can be wiped with napkins or washed with standard detergents (non-abrasive),
Plastic panels for the kitchen are made of hard PVC, resistant to high temperatures (sensitivity threshold - 120°),
Modern plastic finishing allows you to create a kitchen backsplash with any design - with unusual prints, three-dimensional patterns or original colors; transparent wall panels are often used,
And the main advantage is that the walls and apron are covered with plastic - it is budget-friendly and affordable.

Cons of plastic trim

Of course, plastic wall panels have their drawbacks - in most cases they are a counterbalance to the affordable cost. The main negative characteristics of plastic include:

Small margin of safety, low wear resistance,
Possibility of damage to the front decorative panel due to prolonged contact with detergents or ultraviolet rays,
Flammability upon contact with open fire - this should be taken into account when arranging the kitchen apron.

Do not think that finishing a kitchen with PVC panels is impractical or unprofitable. The main thing is to choose the right material.

When choosing kitchen wall panels, you need to follow these recommendations:

The dimensions of the plastic sheet or panel should be larger than the apron area so that the material extends behind the cabinets and is slightly below the working surface.
If you plan to place plastic close to the hob, then do not forget to make sure that the material has fire safety certificates.
The color scheme is selected depending on the features of the kitchen: large patterns and dark colors are preferable in spacious rooms, and in small rooms wall panels with small floral patterns or calm light colors will be more appropriate. A win-win option is light, plain or wood-imitating panels without gloss.

You can choose wall panels with unique design textures: metallized for hi-tech, brick for minimalism, wood – for classics, imitation of old images or ornaments - for vintage.

Advice! The plastic apron should be supplemented with a border that protects the joints of the panels from moisture and dirt.

We fasten the wall panels with our own hands

To attach the panels to the apron or to the walls you will need the following tools:

Hammer drill and screwdriver,
Pencil, tape measure,
Plumb or level
Construction stapler, staples for it,
Glue,
Metal profile or wooden beams to create sheathing,
Suspensions,
Dowels, screws,
Actually PVC panels of the selected type and size.

Method 3. Plastic can also be installed on the sheathing - first, the panels are screwed (attached) to a profile or strip, and then attached to the wall.

Method 4. Installation of plastic panels using metal profiles and brackets is carried out using a similar technology using lathing.

Plastic panels for lining the kitchen apron and walls offer an endless choice of designs that will transform your kitchen. You can choose from a wide palette of colors - from white to black, smooth or textured surfaces imitating leather, fabric or any natural material, three-dimensional drawings, photo printing, semi-matte, matte, glossy or mirror finish. And if desired, the plastic panel is easy to change, since the material is budget-friendly. More information about the plastic apron can be found in the material: Plastic apron - information for the buyer.

Plastic panels for finishing kitchen aprons and walls
Everything about PVC kitchen wall panels: the pros and cons of plastic, types, selection tips and instructions for installing in different ways with your own hands.

Kitchen renovation is a responsible and expensive undertaking. How to make it the least painful for both family members and the family budget? The use of plastic panels will help you save time and money on kitchen renovations.

What is unique about the material?

Seamless panels fit tightly to each other, suture panels leave the joint visible. PVC panels are a universal finishing material for interior spaces. This building material is not new at all, but has already firmly gained popularity in the finishing goods market.

Universal material properties

Firstly, PVC plastic panels for the kitchen can be installed horizontally, vertically and at any angle.
Secondly, the material is used both for finishing walls and ceilings, and for balconies and loggias. Among other things, window slopes in most cases are made of plastic panels.
Thirdly, the standard size of a panel is considered to be a material thickness of 10 mm, a length of 2700 mm, and a width of 250 mm.

Key Features: Where does the quality lie?

The main differences between plastic panels can be identified:

Coating material. On the construction market you can find glossy as well as matte panels made of polyvinyl chloride. Gloss appears due to the application of a specialized varnish to the surface of the material.
Type of drawing on the material. Various types of patterns are applied to the surface of the PVC material. A printed pattern is applied to the material with paint, and a film pattern is applied by applying a colored film with a pattern to the front surface. This is a great opportunity to create a unique design with plastic wall panels for the kitchen with photo printing.
According to the type of junction of materials. Based on this feature, a distinction is made between seamless and seam panels. Seamless plastic panels form gaps at the junction, which are provided for by the decor of the material, and seamless panels fit tightly to one another.

Lining or weaving - this is the “popular” name given to plastic panels with a seam joint and a width of 100 mm.

How to save time and money when decorating your kitchen?

When renovating a kitchen, what is important, first of all, is the speed of repair, knowledge and experience of how to lay tiles on the floor.

Everyone understands that enduring inconvenience due to repairs for 1-2 days and 2-3 weeks is a very big difference.

Therefore, PVC plastic panels for walls, kitchen ceilings, as well as bathrooms and balconies are deservedly popular during renovations for many reasons, the main of which are:

relative cheapness of the material,
speed in completing finishing work.

To lay regular tiles, a lot of time is spent both on laying and leveling the walls. In addition, it is necessary to agree with a good craftsman, since laying tiles without experience and appropriate qualifications is a difficult task that can result in both damage to the material and failure of the repair itself.

There is also a lot of daily noise and dirt from laying tiles, no one has canceled it. This situation is absolutely unacceptable in a house where there is a small child or an elderly person.

Finishing the kitchen walls with plastic panels allows the owner to complete the fastening of the panels in the kitchen in a short time (installation usually requires one working day). PVC panels are not only a profitable option in terms of pricing, but also in terms of time and labor costs.

Which flooring to choose - moisture-resistant laminate or porcelain stoneware? The answer is not so obvious. Details in our articles.

From this guide you can learn how to make a two-level plasterboard ceiling with your own hands.

Frame installation: laying the foundation

Kitchen renovation with plastic panels begins with the installation of the frame. It all depends on how smooth the walls in your kitchen are.
If the walls are good and fairly even, then you can do without installing a frame.

If the walls are far from perfect, then before attaching the panels, it is necessary to mount and install the frame.
To mount the frame for paneling, you need to stock up on dowels and screws. Next, using fasteners, you need to fix the plastic guides at a distance of 40-50 cm from one another on the wall and 30-40 cm on the ceiling.

Plastic guides must be installed both at the beginning and at the end of the panel.

The material can be attached to metal, wood or plastic sheathing. However, it is preferable to choose plastic guides, due to their exceptional properties to withstand temperature changes. In addition, plastic sheathing is relatively lightweight and extremely easy to install.

So that in the future you do not have questions about how to cover a kitchen with plastic panels and problems with polyvinyl chloride panels, use the step-by-step advice of a professional:

Use a level to level surfaces and also to form right angles.
Insert the first PVC panel to be laid into the groove of the fastening element using the narrow fastening flange of the product.
The second plastic panel should be inserted as tightly as possible to the first.
The panels should be secured when you are completely sure that there are no gaps between them.
All polyvinyl chloride material must be secured in a similar manner. The last panel must be reduced by 6-8 cm. Then the material must be inserted into the groove of the fastener and the groove of the previous panel.
Additional lathing for materials will be required in places where future kitchen shelves and cabinets will be attached. Don't forget about it!

If the walls in the kitchen are smooth, then you do not need to install a frame; you can easily fix the PVC material using liquid nails.

Kitchen finishing with plastic panels can be either complete or partial. For example, plastic panels for a kitchen apron are perfect as an alternative to a more expensive option - skinals.

Kitchen apron made of plastic: 10 reasons “FOR”

High impact resistance of the material. The panels do not break or crack under mechanical stress.
Good moisture resistance of the material.
The color scheme of the panels does not become distorted over time.
A simple principle of material installation.
Durability of PVC panels (more than 10 years of excellent operation).
The material can be drilled perfectly with ordinary wood drill bits.
There are no seams between the elements. It is possible to install a single structure up to 4 m.
Wide range of designs, monograms, compositions.
The panels are absolutely resistant to aggressive detergents.
The possibility of repairing the material and partial dismantling remains possible.

Tile vs panel: which is better?

If you are still in doubt about what to choose: a PVC panel or ceramic tiles, we will give a comparative description of the two materials that are the main ones when decorating a kitchen.

Plastic PVC panels for the kitchen: cheap and cheerful? Incorrect answer
Plastic panels for the kitchen are an excellent budget solution for kitchen walls and ceilings. Installation rules, photos, videos of the process.