How to properly wash horizontal blinds. How to clean and wash horizontal blinds at home Washing horizontal blinds

With the help of blinds it is convenient and easy to regulate the level of lighting in the room. But dust settles on them very quickly. Don't know how to wash blinds at home? I have collected recommendations and methods for you.


Blind Cleaning Basics

When cleaning by hand, be careful:

  • Wax-based products. The wax absorbs dust but remains on the fabric.
  • Cleaning brush. You can use them to brush away the dust, but it will settle immediately.

Method 1. Remove dust

How to clean blinds from the accumulated layer of dust? Very simple! Follow the instructions:

Illustration Instructions

Step 1

Lay an oilcloth on the floor so as not to stain it when cleaning.


Step 2

If there is not a lot of dust, use a brush. Sweep dust from top to bottom.

Cleaning the blinds should be done first from the front side, then you need to unfold them and work on the second side.


Step 3

Use a vacuum cleaner with attachment when there is heavy dust.


Step 4

Use a rag or napkin soaked in a cleaning agent and disinfectant spray to wash the vertical slats.

Method 2. Eliminate heavy dirt

For severe stains, this recipe will help:

Illustration Step by Step Actions

Step 1

Apply the soap solution to the blinds, then rinse with warm water.


Step 2

Using a paint brush dipped in fabric softener, go over the slats on both sides.

If you didn’t get everything clean the first time, repeat the steps twice.

Method 3. Relieving static tension

Dust mainly accumulates due to the presence of static voltage, which is also easy to get rid of:

Illustration Sequencing

Step 1

Check for static electricity by touching the slats with your fingers. You will feel that they are electrified.


Step 2

Put on a clean cloth mitten. Apply fabric softener to it.

Using a top-to-bottom motion, distribute the product onto each slate without removing the blinds.

The effectiveness of using an air conditioner depends on the degree of air humidity. The more humid the air, the stronger the antistatic effect will be.

Fabric softener will not only get rid of static tension, but also:

  1. Increases the level of protection against contamination.
  2. Increases the resistance of lamellas to moisture.
  3. The white color becomes snow-white again, and the colored color retains its brightness.

Method 4. How to wash blinds

If dry cleaning does not give the expected effect, you will have to wash the vertical fabric blinds. Remove the curtains from the curtain rod by removing the bottom chain and weights.


Washing rules:

  • Place the slats in the bathtub and soak them in warm water and laundry detergent.
  • The slats can be rubbed with a brush and detergent.
  • Remove dirt with stain remover. For white blinds, you can use bleach.
  • Rinse off the foam under running warm water.

Keep in mind that the slats may shrink when washed in a machine, losing their original appearance. Manufacturers do not recommend washing blinds in a machine.

If you decide to do this:

  • The machine can only be set to manual mode.
  • Wash without spinning.
  • Water temperature up to 35 °C.

After washing in a machine, the slats usually become softer, so it is not recommended to wash them in a machine often. The cost of frequent washing in an automatic machine is high - the product will deteriorate.

Drying of the lamellas should be carried out without bending or twisting. It is also not recommended to squeeze the slats, so as not to spoil their appearance.


The main rules on how to wash blinds at home:

  1. Blinds must be treated with antistatic agents. This results in significantly less susceptibility to dust.
  2. Can be cleaned with a vacuum cleaner with a special attachment. If this is done every time along with cleaning the apartment, then frequent washing will not be required.
  3. Depending on the material, cleaning occurs in different ways:
    • For lamellas with a smooth surface - It is enough to walk with a soft cloth;
    • For fabric strips- You should use a fluffy brush.
  1. To wash horizontal blinds, use special brushes. They are very comfortable and practical.

Conclusion

I hope you can easily cope with any of the listed methods. If you have any questions, ask them in the comments. And the video in this article will clearly show how to properly care for blinds.

To ensure that the slats always look clean, you need to remove dust from them 1-2 times a week. An ordinary rag, vacuum cleaner, special brush or broom is suitable for this. If the blinds are very dirty, they can be washed with water and soap or vinegar; in the kitchen it is better to use anti-grease products. To make the lamellas less dusty, they are sprayed with an antistatic agent.

Horizontal blinds are an integral part of offices, although some fit quite organically into the interior of apartments or country houses. From time to time they need to be washed; dust settles on them quite quickly; kitchen blinds suffer more from soot and a greasy yellow coating. The easiest way to remove and wash the blinds is in the bathroom under the shower. It is difficult for a girl to remove the entire structure and carry it to the bathroom, so we will tell you how to wash the blinds without removing them from the windows.

Cleaning is always carried out from top to bottom; if you do the opposite, dirt will flow and stain the lower slats.

Dry cleaning

Antistatic broom

The more often you sweep away dust from the slats, the longer they will delight the eye with their impeccable appearance. For frequent cleaning, a plume broom, the same one used by maids in films, is suitable. This device has the funny name pipidastr from English PP duster(cloth).

The broom helps not only to brush away accumulated dust, but to remove it using static electricity. You just need to hold the handle between your palms and vigorously rub your hands as if you are trying to warm up. From these movements, the synthetic pile will become electrified and will attract dust particles.

Close the blinds and carefully stitch the front and back sides. This method cannot cope with greasy kitchen deposits, but it is quite suitable for removing dust. After the work is finished, you need to twirl the broom again between your palms with the fluffy side down and the dust will fall off. A very dirty sultana can be washed carefully in warm soapy water.

PP duster It is quite convenient to use; it is not without reason that specialists from cleaning companies use it.

Vacuum cleaner

Set the power control to minimum to avoid bending the metal plates during cleaning. A furniture attachment or a special device with fingers is perfect for our purpose. Turn on the vacuum cleaner and gently move the brush along the plates. Vacuum your slats regularly and they will always look neat.

Brush

Blind brushes come in two configurations:

The first product looks like a pen with plastic “fingers”, each with a piece of fur fabric wrapped around it. At first it is difficult to install the brush in the correct position, but over time the proper dexterity appears. The procedure is performed in the open position, you need to install the teeth between the lamellas and move from the edge to the center, when the brush rests on the threads, it is simply rearranged and moved on. If it is too dirty or you are washing kitchen blinds, then soak the brush in water with added dishwashing liquid. Squeeze the wet brush well with your hand so as not to smear the dirt and proceed as described above.

The second device is more like plastic tongs with three “fingers” in a microfiber glove. The tongs are run between the lamellas, and cleaning is carried out as in the first case. The compression force can be adjusted thanks to a movable plastic handle.

Washing blinds

Before washing the blinds, vacuum them or sweep away the dust with a broom. The methods described below are suitable for aluminum and plastic slats, as well as polymer products. These methods are not suitable for wooden and fabric blinds.

Method No. 1

What you will need:

  • Microfiber cloth
  • Dry rags
  • Bucket with soap solution

Let's prepare a soap solution; a few drops of dishwashing detergent, a little soap shavings or powder will do for this. The selected component is dissolved in warm water, a microfiber cloth or kitchen sponge is wetted. Blinds are washed closed on both sides. Be careful because aluminum slats are easy to break or bend, so it's best if you press them directly against the window. Wash along the plates.

You can also wash it in the open state; an old sock is good for this. It is dipped into the solution, squeezed well and put on the hand, the thumb is placed under the plate, and the remaining fingers are placed on top and moved along, thus wiping each strip.

From time to time, rinse the rag in the solution so as not to carry dirt around. Be sure to rinse off any remaining detergent with clean water.

Method No. 2

What do you need:

  • 2 spray bottles
  • Pure water
  • Detergent composition (choice: “Mr. Muscle”, glass cleaner or water with vinegar added)
  • Old rags

Fill one spray bottle with cleaning solution, the other with clean water. We put a rag on the windowsill, because the solution will flow quite strongly. Close the blinds and generously spray the cleaning composition, you need to evenly wet the entire surface and wait 5-7 minutes. When you see that the dirt has flowed quite actively, then wash off its remnants with clean water from the second spray bottle. You can wipe the records dry or just leave them to dry.

How to wash blinds: types and methods of washing

The cleaning method directly depends on what material the blinds are made of. They can be:

  • aluminum;
  • plastic;
  • fabric;
  • bamboo or wood.

Blinds can be vertical or horizontal. Each type of accessory has its own method of cleaning dust and dirt. Before proceeding with recommendations for washing various types of blinds, you should examine in detail an important point in working with these items.

How to remove blinds from a window

In order to thoroughly wash the glass and the curtain made of slats, sometimes you have to disassemble the structure. Each type of accessory has its own mounting method:

Horizontal blinds

Most often they are made of plastic, mounted on special “swallow” brackets. In this case, you just need to pull them into a roll and secure the bundle with any clamp. Then move apart the front and rear walls of the fastening lamella and remove the structure. Now you can send the roll to the wash.

Vertical blinds

Everything is very simple here:

  • open the blinds and align them so that all the strips are in one row;
  • open the side plugs on the leading lamellas;
  • remove the chain and weights located at the bottom;
  • remove parts of the blinds from the cornice;
  • We roll them up and put them in the washing machine.

Now let's talk about each method of cleaning accessories separately.

Plastic blinds

At home, “curtains” made of such material can be easily cleaned of dust using special brushes. You should simply brush off the dust from the records from time to time, trying to immediately wet clean the room. This way you will collect all the garbage and it will not return to the slats. A powerful vacuum cleaner is great for dealing with dusty slats:

  • close the blinds;
  • put a special triangular brush on the bell (it is included in almost every unit kit);
  • carefully, without pressing the tip of the vacuum cleaner tightly against the slats, walk over the entire surface of the “curtains”;
  • Open the blinds and clean each slatt again.

Advice. You should change the position of the strips several times in order to remove dust in hard-to-reach places as thoroughly as possible.


If there is a little more dirt, and it has become embedded in the surface of the lamellas, you will have to work much more. If you don’t know how to wash blinds without removing them from the window, I’ll tell you:

  • dilute any dishwashing detergent in a small amount of warm water (do not confuse it with aggressive compounds for grease and soot!);
  • With a soft sponge soaked in this solution, wipe each plank;
  • rinse off the foam carefully with clean water using a soft cloth;
  • Wipe the surface of the slats with a dry, lint-free cloth.

Naturally, this method cannot be called easy. And there is a danger of splashing the window and walls with water. So I'll simplify everything:

  • I remove the blinds from their mountings;
  • I wash off light dust from the surface of the curtains with a shower in the bathroom;
  • if necessary, here in the bathroom I soak the blinds from the kitchen in a detergent solution for an hour or two;
  • I rinse with clean water and wipe dry with a linen towel.

For me, this method is the most acceptable, because it allows me to avoid smudges on windows and wallpaper. I return the clean accessory to its permanent “place of residence.”

Advice. From time to time, wipe the blinds with antistatic agent, office equipment wipes, or cleaning product. They not only add shine to cleaned slats, but also repel dust particles. This way you can enjoy a clean room longer without the hassle of washing strips.

Fabric blinds

Most often they are installed in offices, since such curtains are multifunctional and perfectly complement the business style of the workplace. If there are strips of dirt in your office, go over the covered fabric slats with a vacuum cleaner. Often this is enough.


If you want to clean some spots, you will have to work hard. The manufacturer does not recommend washing such blinds in order to preserve the specific impregnation on the material for as long as possible.

Such curtains can be wiped with... wet wipes to care for the baby's skin. They easily remove small dirt and water stains.

Advice. Do not overdo it - you should not clean the entire lamella with wet accessories. It is enough to clean the overly contaminated area with it; wipe the rest of the surface of the segment with a regular damp cloth.

Wooden and bamboo blinds

This material is very noble and decorative. But it is afraid of water, so such “curtains” need to be cleaned only in a dry way:

  • close the blinds and vacuum their surface;
  • open the structure, go over hard-to-reach places with a feather brush;
  • close again and vacuum the “curtains” again.

I advise you to periodically treat the surface of each lamella made of natural material with a polished furniture care product. This will maintain the brightness of the accessory and help deal with stains.

I hope you liked my tips and practical methods for caring for blinds. Subscribe to my blog and recommend it to your friends on social networks - we have a lot of interesting topics ahead!

It would seem that blinds are so convenient: they make the interior more modern and provide excellent protection from the sun, but there comes a time when they become covered with stains, greasy soot, and lose their luster and shine. That’s when every housewife who loves cleanliness in her home puzzles over whether how to wash blinds, especially if you have never done this before.

But don’t be scared and give up, because all housewives have accumulated a lot of experience in washing blinds. You just need to choose the most suitable option for yourself and learn from our recommendations and videos exactly what will be most useful and effective for you. Well, fans of purity, let's start scooping?

Surely, you have often thought about which blinds can be washed and which cannot. If you look carefully, you can wash absolutely all blinds that are made of different materials, different textures and densities. Although many manufacturers do not recommend washing blinds made from small wooden straws, skillful and careful housewives manage to put in order even such delicate and delicate “curtains.”

But blinds that have been treated with a special impregnation should not be washed with damp rags or wet cleaning methods applied to them, since terrible stains and smudges will form where droplets of moisture are present, so this type of blinds should be put in order using dry cleaning.

How to wash blinds made of different materials?

Let's take a look at some of the types of materials from which blinds are made.

Plastic is considered the most reliable and favorable material. By and large, you don’t really need to wash it: just wipe it with a damp cloth or sponge soaked in warm soapy water.

But the most suitable material for all types of washing is considered to be fiberglass. Such blinds can be washed with a damp cloth or wiped with a dry sponge, and without fear, you can thoroughly remove all dust with a vacuum cleaner. What can we say, such blinds can not only be washed, they can even be washed like curtains.

Blinds with an admixture of metal materials can be easily washed with a regular damp cloth or napkin, and if they have old stains or greasy soot, the metal surface can be easily washed using special products or a soap solution.

It is not recommended to wash wooden blinds using large amounts of water, and often this should not be done either, since real wood is very sensitive to moisture and under the influence of water can easily swell and lose its shape.

The most capricious and delicate are fabric blinds. Their manufacturers strongly recommend dry cleaning, but the fabric most often needs wet cleaning and washing.

But our inventive and experienced housewives easily wash what cannot even be treated with water, and wash what is prohibited from being washed. The secret of these women is that you need to know how to carefully implement these tricks for washing various types of blinds into everyday life.

How to wash without removing from windows?

There are not many options for washing blinds: you either wash them while hanging, or remove them from the window, and then wash or wash them, of course, exclusively by hand. There is no talk of any delicate washing in a machine.

If you decide not to remove the blinds from the window, you can thoroughly vacuum them and wipe them with a damp cloth or brush.

If you prefer to do a radical cleaning using foam and soapy water, then be prepared for the fact that in this case only the blinds will be clean, and everything around, including walls and windows, will be completely covered with foam, soapy water and splashes.

If the painted picture does not scare you, then you can try to wash the blinds without removing them from the windows. This, of course, will take you a lot of time, but the result will undoubtedly please you.

In order to wash horizontal blinds, you need to periodically open and close them, washing each slatt individually. The same can be done with vertical ones, placing each strip separately on your hand and working the entire surface with a damp or dry cloth (depending on the material of the blinds).

options, by what means You can wash the blinds, not so much. Many housewives are content with what is available in every home: you can use dishwashing detergent, a soap solution or shampoo, even a weak solution with the addition of washing powder - all this is suitable for washing the blinds. You can even use various sprayers to clean glass and windows, but This product is only suitable for plastic blinds(using this option, they can not be removed from the window, since it is enough to treat each slate with a piece of fabric soaked in this product).

If we talk about options for washing blinds, then the “without removing from the window” method is suitable for dusty blinds, which need to slightly refresh their appearance and wash out minor dirt. Well, if your blinds have already acquired a noticeable layer of dirt or greasy soot over the years, then the option of washing without removing will not work. You either buy yourself new blinds, or remove the existing ones - and quickly go to the bathroom in order to thoroughly wash them and restore their lost novelty.

How to wash horizontal blinds?

When you read these recommendations, each of you probably had an idea of ​​how to wash horizontal blinds without removing them from the window. After all, they have quite complex fastenings, and they are all fastened differently, since each manufacturer has its own parts for assembling and installing blinds. Not every woman will be able to cope with such a difficult task on her own, especially since her husband cannot always be asked to help with something around the house, so we have to do what is in our power. So, as they say, we will wash the blinds without “leaving the cash register.”

First, let's look at the basic tips, which are the initial step for any of the methods that will be outlined below.

Before starting work, you should get rid of the main dust contaminants, since if you start washing immediately with soapy water, this may leave dirty streaks on the slats of the blinds.

To do this, close the blinds, use a vacuum cleaner to carefully go over their entire surface from top to bottom, then close the blinds in the other direction and do the same. Instead of a vacuum cleaner, you can use a small pressure of water, washing away all the dirt, first from one side and then from the other.

These procedures can get rid of the bulk of dirt, and washing the blinds with soapy water after them will be much more effective.

Once the blinds are assembled, washing them is strictly prohibited, since using water will only glue the slats together, after which it will be very problematic to return them to their former condition.

Before washing, carefully remove all the plastic plugs that are located on the end sides of the cornice and trim. You may think that there is no need for such a complex operation. But no, dear housewives, if you do not want moisture getting into the blinds to provoke metal corrosion, this must be done. And only after your blinds are completely dry, you can return these plugs to their place. Yes, and one more thing: Leave window cleaning for later, since splashes and soap stains will in any case get on the glass.

So, our determined housewives, let’s begin a short excursion into the basic recommendations on how to wash horizontal blinds without removing them from the window:

Method 1. One of the easiest options for cleaning your blinds is to use a soft brush. must be dry. The brush can be replaced with a small piece of sheep wool or a paint brush. What to choose is up to you. Using the device you choose, carefully wipe each lamella individually. Of course, this method is suitable for the initial stages of contamination, since it may seem to you that the removed dust could just as easily settle on another surface or return again to the blinds. That's why It is best to carry out such dry cleaning in a room exposed to sunlight and with the window open: this way you will see that the dust goes safely outside.

For washing horizontal blinds, so as not to remove them from the window, many markets offer special forceps, which are equipped with fiber fabric on both sides. The fibrous surface can be moistened with water or a small amount of an antistatic agent can be injected. This will perfectly help absorb settled dust and prevent it from returning to its “dislocation” sites for some time. These tongs are ideal for horizontal blinds that you don't want to remove from the window, because in one motion you can wash the slats on both sides.

Method 2. This method is suitable for washing horizontal blinds made of plastic or plastic material. Without removing the blinds from the window, wipe each slat on both sides with a damp cloth or napkin. In a basin, dilute a small amount of washing powder or other suitable detergent in warm water, soak a cloth or sponge in the solution and begin washing the horizontal blinds. After treating all the slats, wipe them again, but with clean water, which you can add a small amount of vinegar(this will add shine to plastic blinds). The use of fleecy fabric is not recommended so that no small fluff remains on the blinds after washing. This method is perfect if your blinds are slightly dirty.

Well, if they have old stains or greasy deposits or soot, then you can wash them off perfectly using the following method.

Method 3. Pour hot water into a basin, add dishwashing detergent and laundry soap, whisk thoroughly until a thick and dense foam forms. Then take a large rag, soak it generously in soapy water and grab the foam. We wipe each lamella of horizontal blinds. This solution is suitable for plastic and plastic blinds. If old greasy stains cannot be removed with a regular rag, take a hard sponge, pour a little washing powder on it and thoroughly rub the dirty area. After washing with cleaning products, thoroughly rinse the entire area of ​​your blinds. It would be nice, of course, to try to remove the horizontal blinds and wash them in the bathroom, but you can do just fine without that too. Using this method will help you effectively remove such contaminants without removing the blinds from the window.

Method 4. We fill a basin with about five liters of water, to which we add a product that has an antistatic effect. This procedure is best performed with rubber gloves, over which put on fabric gloves. Take a small piece of gauze or a soft porous sponge and with this solution thoroughly wipe each rack separately, carefully holding it on both sides. Thanks to the antistatic agent, dust will not settle on your blinds for a long time. Regardless of the option you choose for washing your blinds, you can wipe them with this product at any time so that you won’t be able to start washing them any time soon.

Method 5. You can, of course, fill basins with water, make soap solutions, or you can just relax a little and go out into the fresh air, take a leisurely stroll to the store and buy special wipes that are designed to care for office equipment. Close your horizontal blinds, lean them slightly against the window and wipe each strip with these napkins, replacing the napkin with a new one as it gets dirty. As a result, there will be no stains or streaks left on your blinds after soapy water, and metal corrosion will never occur.

Thanks to these simple tips, you can easily wash horizontal blinds without removing them from the window. Now you can safely share these recommendations with your friends, and they will be delighted to wonder how you managed to restore the shine and former novelty of your blinds.

How to wash vertical blinds?

This type of blinds is most often used in schools or offices, but is sometimes found in apartments characterized by a discreet elegance of style. It is their housewives who are faced with the question: “How to wash vertical blinds at home?”

Vertical blinds are much easier to clean than horizontal ones because the strips do not stick together.

So, let's begin to replenish your already rich store of knowledge with valuable and necessary experience on how to wash vertical blinds at home. We need to start with general recommendations.

Before you start wet cleaning, the blinds must be closed and vacuumed thoroughly in order to collect a significant amount of dust, and you will have to change the water much less often when washing. The slats must be moved to one side, and the blinds must be removed and rolled into a roll. We fill the bathroom with enough water so that the vertical blinds can be immersed in it. Pour half a glass of washing powder and a little dishwashing detergent into warm water (you can add a little shampoo, which will create dense foam). We immerse the blinds in the bathroom and let them lie for a while - this will give the accumulated dirt a chance to clear away. Then use a soft cloth or porous sponge to wipe each vertical strip. After this, we flush out the soapy water and begin the “shower procedures.” Rinse the blinds several times with a stream of water, hang them on the shower bar, let them dry completely, only then can you return them to their place.

There are some more effective tips on how to clean vertical blinds at home. Study them and choose the one that suits you best:

Method 1. You need to take a large rag or a large piece of gauze, which will absorb all the moisture as much as possible. Close the vertical blinds and spray the entire surface with window cleaner, leave for five minutes to let it work. Then wipe each strip, moving from top to bottom.

Method 2. You are just lucky if you have your own home with a private yard. This will work to your advantage when washing vertical blinds. Remove them and hang them on the fence or any crossbar. Take a watering hose and, under a large stream of water, mercilessly wash away all the dirt on both sides. If you decide to wash your blinds in the summer, this is a great way to have some fun with the kids while escaping the unbearable heat. After this procedure, wipe the blinds with a dry cloth or piece of gauze; they will absorb moisture perfectly.

Method 3. This method is great for wooden and bamboo blinds with small slats. Because such blinds absolutely cannot be washed with water, you can remove dust from them using feather brushes, a dry soft brush or a vacuum cleaner. To remove stubborn stains from vertical wooden blinds, use special products designed for caring for wood.

Method 4. This washing method works great for fabric vertical blinds. Do not forget the fact that fabric blinds require more frequent processing than aluminum and plastic ones. The material from which these blinds are made is treated with a special impregnation, so they should be cleaned with a vacuum cleaner. But if your fabric blinds are very dirty, you can wash them. You ask how? There is still a secret to washing fabric blinds. To do this, remove each lamella, carefully roll it into a roll, place it in a bag for washing delicate items, while Be sure to remove the chain from the blinds. You must first prepare the bathroom by filling it with warm water and adding washing powder. Immerse bags of fabric vertical blinds in it and leave for an hour and a half. At the end of this time, carefully remove the blinds and rinse thoroughly with water. Without squeezing them out, return them to their place, let them acquire their previous shape.

Well, having replenished your arsenal with these tricks and valuable tips, washing vertical blinds at home will no longer be a nightmare for you, but will become an easy and carefree task.

Blinds have long been part of everyday life. They are more practical and functional than classic curtains and curtains. Blinds can completely block out sunlight and allow you to control the brightness of the lighting. In addition, they are easy to use and do not require complex maintenance. The products look aesthetically pleasing and attractive and complement the interior.

Today, blinds can be found in offices, apartments, houses and even industrial premises. Cleaning is quite easy if you follow the basic rules. Let's look at how to clean blinds at home.

Cleaning Features

The cleaning method depends on the type and type of material of the products. Blinds come in horizontal and vertical types. In addition, lately you can come across pleated curtains. They represent a large strip of rigid fabric, which is folded like an accordion. Plastic, wood and bamboo, fabric and metal are used as manufacturing materials.

Horizontal blinds are the most common option and are often made of metal and plastic. In this case, thin metal or plastic strips are connected with a thick thread. The advantages of the product include ease of use, practicality and functionality, and long service life. This is the best option for the office.

Vertical blinds have a more cozy look. They transmit soft light, which allows you to create a calm and cozy environment in the room. Therefore, such products are chosen for an apartment or office. Regardless of the type and material, there are several basic care rules that apply to all blinds.

Basic rules of care

  • Before cleaning horizontal or vertical blinds made of any type of material, be sure to read the care instructions. Follow the recommendations!;
  • Almost any type of product can be cleaned using a vacuum cleaner with minimal power or with special attachments. Vacuum the surface thoroughly on each side before each wash. The more often you vacuum the panels, the longer they will last;
  • Regular ventilation will help keep the products clean. It gets rid of excess dust and unpleasant odors;
  • For metal and plastic, use a soft cloth, clean water or regular soap solution. After wet cleaning, the surface must be wiped dry;
  • Wooden blinds should not get too wet, otherwise they will lose their shape and deteriorate! It is advisable to wipe the panels only with a dry cloth. Use woolen cloth or microfiber, as they remove dust most effectively and do not allow it to settle for a long time;
  • To quickly clean plastic blinds from dust, unfold the slats parallel to the window and wipe with a damp cloth;
  • Fabric blinds can be removed and washed in a washing machine. In addition, you can take fabric items to the dry cleaner;
  • To clean vertical fabric blinds without removing them from the window, wipe the surface with a lint brush;
  • Do not soak products in hot water and do not dry the fabric with electrical appliances! For drying, do not use radiators, radiators, hair dryers or other means. Dry curtains naturally;
  • It is advisable to treat both vertical and horizontal blinds with an antistatic agent. Then dust and dirt will stick to the surface less often. By the way, you can make an antistatic agent yourself. What is needed for this, see.

How to clean horizontal blinds

Plastic blinds can be washed in the bathroom by removing the products from the windows. Then dip the cloth in warm water and leave for a few minutes. For greater effect, add a little liquid soap or soap shavings.

Do not keep wooden, metal or aluminum blinds in water! When exposed to water, wood deteriorates, darkens and loses its original appearance, and metal rusts.

After soaking, gradually lift the products and wash off the dirt from each strip with a shower. First rinse the fabric on one side and then on the other. After the procedure, wipe the products with a dry cloth.

To clean horizontal blinds from dirt without removing them from the window, use special triple brushes that clean the panels on both sides at once. To clean, rotate the panels parallel to the window. Then close the canvas and spray with window cleaner. Wipe each element with a clean, lint-free cloth.

Regular cleaning is carried out with ordinary damp wipes. They eliminate dust, do not leave dirty marks and are safe for metal. Metal blinds will not rust. Now let's find out how to clean vertical blinds.

How to clean vertical blinds

Cleaning vertical blinds is easier and more effective using a steam cleaner. To do this, close the canvas and walk the device a short distance from the surface. A powerful jet of steam effectively removes dirt without the use of detergents. After the procedure, wipe off the dirty water with a dry cloth.

To clean vertical curtains without removing them from the windows, also use a wool or microfiber cloth and a soap solution. You can add a little vinegar to soften the water. After cleaning, wash off the soap with clean water and wipe dry. In this case, special triple cleaning brushes or pliers are also suitable.

Recently, vertical roller blinds have been gaining popularity. They look more cozy than blinds, and at the same time they do not attract dust like fabric products. Regularly remove dust from products using special brushes or a soft, dry cloth.

When caring for roller blinds, it is also effective to use a vacuum cleaner at minimum power or with a fabric attachment. In this case, it is better to remove the canvas and lay it on the floor, and then go over the material with a vacuum cleaner. And stains on fabric can be removed with a regular school eraser.

Polyester roller blinds can be washed by hand. Products made from bamboo and natural fabrics cannot be washed! Roller blinds cannot be ironed or dried in a curled or vertical form! To dry, the fabric is spread out on a horizontal surface, folds and creases are straightened out, and then left at room temperature.

For more information on how to properly care for and how to clean rolls without harming the quality and appearance of the products, see. And then we will look at how to clean blinds depending on the type of material.

Wood and fabric

Natural wooden blinds are much more difficult to clean, since wood does not like water. Due to contact with moisture, wood swells and becomes deformed. To clean such products, it is recommended to use dry cloths or a vacuum cleaner.

Despite the difficulty of maintenance and expensive cost, many people prefer wooden blinds. After all, these are environmentally friendly and natural products that look harmonious and aesthetically pleasing. In addition, they create a comfortable microclimate in the room and make the atmosphere cozy.

To clean fabric blinds, they also use a vacuum cleaner and a special attachment for cleaning upholstered furniture. If coffee, tea, grease or dirt stains appear on the fabric, many items can be washed in a washing machine on a delicate cycle. But before washing, be sure to look at the instructions and find out if this is possible!

To wash fabric blinds, remove and disassemble the product, setting aside parts that cannot be washed. Then roll the fabric and put it in a special bag for washing clothes. If there is no bag, wrap the slats in gauze. After washing, hang the curtains to dry or lay them on a horizontal surface.

Plastic and metal

Metal and plastic slats are easy and quick to clean. The slats are wiped systematically one after another using a damp sponge or cloth. A sponge or cloth is moistened in soapy water and vinegar.

To avoid bending the slats and speed up the process, wipe the slats on both sides at the same time. To do this, bend the sponge in half or take a special triple brush or brush-pliers for cleaning blinds. And to optimize the work, close the canvas parallel to the surface of the window and wipe the products from top to bottom. Then turn the blinds 180 degrees and repeat the procedure.

Periodically remove the blinds and give your bathroom a more thorough cleaning. Rinse the products under running water. To remove serious stains, soak the slats in soapy water or water with diluted dishwashing detergent.